Hi,
I have an AiMesh setup of Asus devices (RT-AX86U, RT-AX56U, RP-AX56) and have a guest network. The guest network is implemented using the built in VLAN 502 with the subnet 192.168.102.0/24 and my main lan is on 192.168.1.0/24.
I want to allow access from my guest network to a specific IP in my LAN (printer) and I thought of adding some iptables forwarding rules to allow it, and the plan was to allow traffic from br2 (the bridge for VLAN 502) to that specific IP by adding a FORWARD rule, however even the most simple rule I did for test didn't work
Note that I did verify using tcdpdump that the traffic reaches the br2 bridge.
Any pointers on how to do it or to find where the traffic gets dropped would be much appreciated.
Thanks!
I have an AiMesh setup of Asus devices (RT-AX86U, RT-AX56U, RP-AX56) and have a guest network. The guest network is implemented using the built in VLAN 502 with the subnet 192.168.102.0/24 and my main lan is on 192.168.1.0/24.
I want to allow access from my guest network to a specific IP in my LAN (printer) and I thought of adding some iptables forwarding rules to allow it, and the plan was to allow traffic from br2 (the bridge for VLAN 502) to that specific IP by adding a FORWARD rule, however even the most simple rule I did for test didn't work
iptables -I FORWARD -d 192.168.1.52 -j ACCEPT
the traffic gets dropped before somewhere and I can't find where. Note that I did verify using tcdpdump that the traffic reaches the br2 bridge.
Any pointers on how to do it or to find where the traffic gets dropped would be much appreciated.
Thanks!