What's new

Kernel message in log RT-AC86 - 386.1_beta5

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

St561n

New Around Here
Hi,

I am new to the asus/Merlin world and I hope that somebody can help me with the following question:
After installing diversion I get every about 20 minutes the following messages in the log file:
Jan 30 21:06:19 kernel: pgd = ffffffc00b0fe000
Jan 30 21:06:19 kernel: [00000000] *pgd=0000000011724003, *pud=0000000011724003, *pmd=0000000011714003, *pte=0000000000000000
Jan 30 21:06:19 kernel: CPU: 1 PID: 29376 Comm: dcd Tainted: P O 4.1.27 #2
Jan 30 21:06:19 kernel: Hardware name: Broadcom-v8A (DT)
Jan 30 21:06:19 kernel: task: ffffffc01e9f60c0 ti: ffffffc011654000 task.ti: ffffffc011654000
Jan 30 21:06:19 kernel: PC is at 0xf731cf44
Jan 30 21:06:19 kernel: LR is at 0x1dd14
Jan 30 21:06:19 kernel: pc : [<00000000f731cf44>] lr : [<000000000001dd14>] pstate: 600f0010
Jan 30 21:06:19 kernel: sp : 00000000fff9c418
Jan 30 21:06:19 kernel: x12: 00000000000a2050
Jan 30 21:06:19 kernel: x11: 00000000f65ff024 x10: 00000000000a23c4
Jan 30 21:06:19 kernel: x9 : 00000000f65ff690 x8 : 00000000000a287c
Jan 30 21:06:19 kernel: x7 : 00000000f65ff6c8 x6 : 00000000000a2876
Jan 30 21:06:19 kernel: x5 : 0000000000000000 x4 : 00000000f65ff674
Jan 30 21:06:19 kernel: x3 : 0000000000000000 x2 : 00000000fff9c3f4
Jan 30 21:06:19 kernel: x1 : 000000000007d75a x0 : 0000000000000000
I tried already to search for some of the message but I was not able to find something specific.
Before I was able to install diversion I had to format the USB stick connected to USB3.0 port to ext4 which I did via putty. Somewhere around this the router rebooted (was may be also at the point where I switched from USB Mode 2.0 to 3.0. After the restart the router lost time/date and I was not able to start amtm until time was synchronized again. I mention this because it may have also an impact on the above mentioned messages.

Hope that some expert can help me.

Thank you very much in advance!
 

Similar threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top