kernel: wl0: PSM microcode watchdog fired at 2222711 (seconds). Resetting.

[Morris]

I'm getting these more and more frequently with an intermittent amount of time between them. Any idea what is happening and how I can mitigate or should I ignore?

Oct 14 17:49:39 kernel: wl0: PSM microcode watchdog fired at 2222711 (seconds). Resetting.
Oct 14 17:49:39 kernel: wl0: reason = psm watchdog at 2222711 seconds. corerev 131 ucode revision 1570.159 features 0x3106
Oct 14 17:49:39 kernel: psmdebug 0x01ff000c phydebug 0x0 macctl 0x84160403 maccmd 0x4
Oct 14 17:49:39 kernel: psm_brc 0x0080 psm_brc_1 0x0200 M_UCODE_DBGST 0x2
Oct 14 17:49:39 kernel: brwk_0 0x058b brwk_1 0x0014 brwk_2 0x20a0 brwk_3 0x0f30 brwk_4 0x0006
Oct 14 17:49:39 kernel: ifsstat 0xaf ifsstat1 0xff txectl 0x4992 txestat 0x405
Oct 14 17:49:39 kernel: rxestat1 0x1 rxestat2 0x500 rcv_frmcnt 0x0 rxe_rxcnt 0x0
Oct 14 17:49:39 kernel: wepctl 0x35
Oct 14 17:49:39 kernel: aqmf_ready0 0x0 aqmf_ready1 0x0 aqmf_ready2 0x0 aqmf_ready3 0x0
Oct 14 17:49:39 kernel: aqmf_ready4 0x0 wepstat 0x8000 wep_ivloc 0x1a wep_psdulen 0x0
Oct 14 17:49:39 kernel: rxe_errval 0x80 rxe_errmask 0x20f rxe_status3 0x202 txe_status2 0x405
Oct 14 17:49:39 kernel: dbg_bmc_status 0x0 psm_chk0_err 0x0 psm_chk1_err 0x0
Oct 14 17:49:39 kernel: PC :
Oct 14 17:49:39 kernel: R0: 0x1860 0x1860 0x1860 0x1860
Oct 14 17:49:39 kernel: psm stack_status : 0x8000
Oct 14 17:49:39 kernel: psm stack_entries:
Oct 14 17:49:39 kernel: 0x1860
Oct 14 17:49:39 kernel: 0x1965
Oct 14 17:49:39 kernel: 0x1dff
Oct 14 17:49:39 kernel: 0x1dff
Oct 14 17:49:39 kernel: 0x21bb
Oct 14 17:49:39 kernel: 0x0c8e
Oct 14 17:49:39 kernel: 0x3eb0
Oct 14 17:49:39 kernel: 0x30ca
Oct 14 17:49:39 kernel: 0) usr_count = 0, schedid = 0
Oct 14 17:49:39 kernel: 1) usr_count = 0, schedid = 0
Oct 14 17:49:39 kernel: 2) usr_count = 0, schedid = 0
Oct 14 17:49:39 kernel: 3) usr_count = 0, schedid = 0
Oct 14 17:49:39 kernel: wl0: fatal error, reinitializing, total count of reinit's[339]

Thank you,

Morris

 

[iassael]

I'm having the same problems, any updates?

 

[Morris]

I'm having the same problems, any updates?

It was a Wireless setting. I'm on the road and don't recall which one. Make note of your settings and then go back to defaults. Once stable, change one at a time per need till it happens

Good luck,

Morris