Making Sense Of robocfg Output

[Digistras]

Hi everyone,

I own a RT-AC68U and running with Merlin's 380.58 firmware.

I'm trying to make sense of the output when I do a robocfg show as shown below:

admin@(none):/tmp/home/root# robocfg show
Switch: enabled
Port 0:  100FD enabled stp: none vlan: 2 jumbo: off mac: 00:26:75:d3:96:e0
Port 1:   DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:00:00:00:00:00
Port 2:   DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:00:00:00:00:00
Port 3:  100FD enabled stp: none vlan: 1 jumbo: off mac: 00:04:4b:80:80:03
Port 4:   DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:1c:23:0b:8e:a4
Port 8:   DOWN enabled stp: none vlan: 2 jumbo: off mac: 00:00:00:00:00:00
VLANs: BCM5301x enabled mac_check mac_hash
   1: vlan1: 1 2 3 4 5t
   2: vlan2: 0 5
  10: vlan10: 0t 5t
  56: vlan56: 2 4 7t 8u
  57: vlan57: 2t 4 7 8u
  58: vlan58: 1t 3t
  59: vlan59: 0t 1 3t 7t
  60: vlan60: 4 5t 7t 8t
  61: vlan61: 7 8t
  62: vlan62: 4t 7t 8t
admin@(none):/tmp/home/root#

From the output, the ports displayed are Ports 0 to 4 and 8 only. But on the VLANs interface assignment list, I see that there are some VLANs being assigned to Ports 5 and 7.

Could anyone please explain to me why did the VLANs list is showing Ports 5 and 7 while I don't have them listed on the Ports list?

Thanks in advance!

 

[Digistras]

Hi all,

Any idea as to why is the robocfg output ls like that?

Appreciate any comments on this please...

 

[ColinTaylor]

This has been discussed quite a few times. For example:

http://www.snbforums.com/threads/strange-infos-from-robocfg-show.20290/
http://www.snbforums.com/threads/some-strange-vlan-settings.20556/