Mikrotik EoIP - Multiple Bridges Over L2TP

[delid4ve]

router 1
Rb200ahx2 - (switch vlans Pre 6.42)
Bridge 1 members:
Port 1 - vlan 1 untagged - to server
Port 2 vlan1 untagged vlan2 tagged - to switch
End of bridge
Vlan 1 192.168.23.0/24 (server supplies dns/dhcp)
Vlan 2 192.168.7.0/24 (pbx ip)

Port 11 - isp
L2tp ipsec vpn server 1 static ip

Router 2
Hapac2 bridge vlans
Bridge 1 members
Port 1 192.168.6.0/24 vlan 1 untagged - Switch 1 untagged
Port 2 - needs to be on the 192.168.7.0/24 network - switch 1 tagged

So my idea is to setup an EoIP tunnel over the VPN - I can get this connected

I can’t work out how to get the vlan across
I’ve tested locally with the vlan passing my switch to ports but I can’t get it to the router and to traverse the tunnel

Any help would be most appreciated

 

[System Error Message]

Lower the MTU for each subsequent VPN over VPN

 

[delid4ve]

I managed to get it working in the end, it was just how i was setting up the new type bridge vlans.
I have something very strange going on though and i cant work out whats going on.

So the following connection (all privates are 192.168.) :
LAN (6.0/24) --> Site To Site VPN (L2TP/ipsec (3.1/32) with EOIP tunnel (Eoip is separate vlan) ) --> Remote LAN (23.0/24)
I can ping both ways
I can RDP both ways
I cannot access any service in a web browser ie a switch on port 80/a nas on 8080.
I can open winbox both ends, it connects but all boxes show blank and it disconnects after 30 seconds or so.
Its not held off by firewall.
Torch shows the traffic flowing both ways
Absolutely stumped.

If I add another VPN in (l2tp ipsec) to site 1 i can access everything including the remote site.
If I add another VPN in (l2tp ipsec) to site 2 i cannot access site 1.

Any ideas where to look.. Been trying to fathom it out for a couple days now but don't seem to be getting anywhere.