RT-AC68U

  • ATTENTION! As of November 1, 2020, you are not able to reply to threads 6 months after the thread is opened if there are more than 500 posts in the thread.
    Threads will not be locked, so posts may still be edited by their authors.
    Just start a new thread on the topic to post if you get an error message when trying to reply to a thread.

adamitguy

New Around Here
How do I assign a LAN port 4 to a different VLan so that it will get a different IP address from 192.168.4.1 subnet automatically?
 

ColinTaylor

Part of the Furniture
How do I assign a LAN port 4 to a different VLan so that it will get a different IP address from 192.168.4.1 subnet automatically?
Search the forum for examples using the robocfg command.
 

adamitguy

New Around Here
This is what I see when I go into the CLI of my router:

[email protected]:/jffs/configs# robocfg show
Switch: enabled
Port 0: 1000FD enabled stp: none vlan: 2 jumbo: off mac: 00:17:10:98:1c:09
Port 1: 100FD enabled stp: none vlan: 1 jumbo: off mac: 00:15:99:6f:cd:d7
Port 2: 1000FD enabled stp: none vlan: 1 jumbo: off mac: c8:0a:a9:0a:b0:92
Port 3: DOWN enabled stp: none vlan: 1 jumbo: off mac: 20:cf:30:e3:3e:26
Port 4: DOWN enabled stp: none vlan: 1 jumbo: off mac: 3c:97:0e:84:db:fd
Port 5: 1000FD enabled stp: none vlan: 2 jumbo: off mac: 88:d7:f6:af:61:40
Port 7: DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:00:00:00:00:00
Port 8: DOWN enabled stp: none vlan: 1 jumbo: off mac: 00:00:00:00:00:00
VLANs: BCM5301x enabled mac_check mac_hash
1: vlan1: 1 2 3 4 5t
2: vlan2: 0 5
1045: vlan1045: 2 8u
1046: vlan1046: 2 7t
1047: vlan1047: 0t 3t 8u
1099: vlan1099: 1t
1100: vlan1100: 0t 1 2t 3t 4
1101: vlan1101: 0 1
1102: vlan1102: 0t 4t 7t
1103: vlan1103: 1 5 7t
[email protected]:/jffs/configs#
ASUSWRT-Merlin RT-AC68U 384.18_0 Sun Jun 28 17:57:07 UTC 2020
[email protected]:/tmp/home/root# cd /jffs/configs
[email protected]:/jffs/configs# ls
[email protected]:/jffs/configs# ls
[email protected]:/jffs/configs# sudo ls
-sh: sudo: not found
[email protected]:/jffs/configs# vi dnsmasq.conf
[email protected]:/jffs/configs# vi /jffs/configs/dnsmasq.conf
[email protected]:/jffs/configs#

How do I configure my router on LAN port 4 to use a different DHCP server on a different VLAN?
 

ColinTaylor

Part of the Furniture
I don't know the specific commands because I've never need to to do it. But there are already numerous posts about this, including examples. Search the forum.
 
Last edited:

L&LD

Part of the Furniture
 

adamitguy

New Around Here
Does anyone know how to put LAN port 4 into a different VLan as right now all LAN ports are on Vlan1 by default on a Asus RT-AC68U merlin router?
 

adamitguy

New Around Here
@ColinTaylor

Currently on my Asus RT-AC68U merlin router, the default settings are being used and when I look at the VLan configurations, VLAN1 is where all lan ports are and VLAN2 is the WAN port. How do I create different subnets for each lan port after I created the VLAN 103?
 

ColinTaylor

Part of the Furniture
Sorry, I don't know as it's not something I've ever wanted to do. As I said previously, there are numerous posts that already cover this so I suggest that you search for those.
 

adamitguy

New Around Here
I tried looking for some clear instructions on how to accomplish this on the forum but I didn't seem to find anything. The only thing I found was how to create a VLan but not assigning a physical port
 

Similar threads

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top