polocabbit
New Around Here
I picked up a RT-AC68U for my new CenturyLink gigabit line. Out of the box setup I was pulling 900 Mbps+ on up and down via speedtest.net. After the firmware update, I'm not even breaking 400 Mbps down and my getting between 500-550 Mbps up.
Pre update: http://imgur.com/KekIVXZ
Post update: http://imgur.com/4yk314I
I'm on stock firmware (3.0.0.4.380_7743-g2cf84e9) and I've tried reboots via the GUI, power cycling, and clearing out the nvram via telnet and power cycling after, but no changes in speeds.
QoS and traffic analyzer are not enabled. CTF is enabled.
Ideally I'd like to remain on stock firmware if possible. Any help would be greatly appreciated in helping me resolve this.
Thanks!
Edit 1: Solution was to roll back to 7378 as mentioned in this thread: https://www.snbforums.com/threads/asus-rt-ac68u-firmware-version-3-0-0-4-380-7743.39689/
Pre update: http://imgur.com/KekIVXZ
Post update: http://imgur.com/4yk314I
I'm on stock firmware (3.0.0.4.380_7743-g2cf84e9) and I've tried reboots via the GUI, power cycling, and clearing out the nvram via telnet and power cycling after, but no changes in speeds.
QoS and traffic analyzer are not enabled. CTF is enabled.
Ideally I'd like to remain on stock firmware if possible. Any help would be greatly appreciated in helping me resolve this.
Thanks!
Edit 1: Solution was to roll back to 7378 as mentioned in this thread: https://www.snbforums.com/threads/asus-rt-ac68u-firmware-version-3-0-0-4-380-7743.39689/
Last edited: