Speed Ports have Negotiated At - Full/Half Duplex

[davewolfs]

How can I view what speed my ports have negotiated at and also see if they are half or full duplex. I am using Merlin's firmware on an RT-N66.

Thanks!

 

[L&LD]

Tools tab on left-hand side of gui.

 

[joegreat]

Tools tab on left-hand side of gui.

Only if you use Merlin's firmware fork...

But you can use command line via Telnet/Putty on any Asus firmware:
chief@RT-AC87U:/tmp/home/root# robocfg show
Port 0: 1000FD enabled stp: none vlan: 2 jumbo: off mac: xx:yy:zz:xx:ww:n1
Port 1: 1000FD enabled stp: none vlan: 1 jumbo: off mac:
xx:yy:zz:xx:ww:n2
Port 2: DOWN enabled stp: none vlan: 1 jumbo: off mac: xx:yy:zz:xx:ww:n3
Port 3: 1000FD enabled stp: none vlan: 1 jumbo: off mac: xx:yy:zz:xx:ww:n4
Port 4: DOWN enabled stp: none vlan: 1 jumbo: off mac: xx:yy:zz:xx:ww:n5
Port 8: 1000FD enabled stp: none vlan: 1 jumbo: off mac: xx:yy:zz:xx:ww:n6

 

[L&LD]

Only if you use Merlin's firmware fork...

But you can use command line via Telnet/Putty on any Asus firmware:
chief@RT-AC87U:/tmp/home/root# robocfg show
Port 0: 1000FD enabled stp: none vlan: 2 jumbo: off mac: xx:yy:zz:xx:ww:n1
Port 1: 1000FD enabled stp: none vlan: 1 jumbo: off mac:
xx:yy:zz:xx:ww:n2
Port 2: DOWN enabled stp: none vlan: 1 jumbo: off mac: xx:yy:zz:xx:ww:n3
Port 3: 1000FD enabled stp: none vlan: 1 jumbo: off mac: xx:yy:zz:xx:ww:n4
Port 4: DOWN enabled stp: none vlan: 1 jumbo: off mac: xx:yy:zz:xx:ww:n5
Port 8: 1000FD enabled stp: none vlan: 1 jumbo: off mac: xx:yy:zz:xx:ww:n6

Oops! Thanks joegreat, I thought I was in the RMerlin universe.

 

[wouterv]

Oops! Thanks joegreat, I thought I was in the RMerlin universe.

Nothing wrong here...the OP is also in the RMerlin universe.