UPNP Problems and something on R700 with Merlin

[badplay]

Hi

i installed merlin on my r700 but i have some trouble with upnp

i use a nas qnap 253 pro and it is upnp enabled also at the router also the ports from 1- 5000.
some ports are forworded with upnp and works some not. here are my problems

i use a ddns service myqnapcloud.com if u use nasadress.myqnacploud.com it want open my nas if i use nasadress.myqnapcloud.com:8080 it opens my nas. with my older router n900 all works without the port

second problem. i want to us rsync but i get rsync error: error starting client-server protocol (code 5) at /home/lapo/packaging/rsync-3.0.7-1/src/rsync-3.0.7/main.c(1506) [sender=3.0.7] in a programm.

also if i want to update my qnap nas automaticelly it want it tells me check your internet connection. but i know that all is fine.

so i think it is a problem with router setup

 

[ColinTaylor]

i installed merlin on my r700

I don't know what the r700 is, but Merlin is only supported on the following Asus routers.

RT-N66U
RT-AC66U
RT-AC66U_B1 (use the RT-AC68U firmware)
RT-AC56U
RT-AC68U/RT-AC68P/RT-AC68UF/RT-AC1900/RT-AC1900P (same firmware)
RT-AC87U
RT-AC88U
RT-AC3100
RT-AC3200
RT-AC5300

https://www.snbforums.com/threads/asuswrt-merlin-custom-firmware-for-asus-routers.7846/

 

[badplay]

r7000 nighthawk from netgear

 

[ColinTaylor]

r7000 nighthawk from netgear

Then you need to ask your question in a different forum.