Vendor Class ID

[maxias]

hi there

im stucking in changing the vendor class id on my router

i've been trying a lot stuff like:

/sbin/udhcpc -i eth0 -p /var/run/udhcpc0.pid -s /tmp/-t2 -T5 -A160 -x 60:41564d2064686370646973636f76657220312e302064736c666f72756d2e6f7267

/sbin/udhcpc -i eth0 -p /var/run/udhcpc0.pid -s /tmp -x 60:41564d2064686370646973636f76657220312e302064736c666f72756d2e6f7267

/sbin/udhcpc -i eth0 -s /usr/script/udhcpc.sh -s /tmp -V "AVM dhcpdiscover 1.0 dslforum.org"

but no luck...

it always stays on "udhcp 1.20.2"

i have a EA6400 with a later Merlin Firmware Firmware:380.59_X6.6.1

i was following the tipps form that thread:

http://www.skyuser.co.uk/forum/tech...8-how-use-factory-asus-firmware-sky-fttc.html


thanks for the help in advance

 

[ColinTaylor]

As far as I know Merlin's firmware is not supported on the EA6400. Maybe ask the people you got the firmware from for support?

FWIW Here is the discussion I had with Shonk about udhcpc, but he was using Asus hardware: http://www.snbforums.com/threads/udhcpc-startup-config.17332/

 

[maxias]

actually it is kind of > http://koolshare.io/merlin_qin_firmware/EA6400/

but thanks for the link, ill try the steps showing

 

[ColinTaylor]

actually it is kind of > http://koolshare.io/merlin_qin_firmware/EA6400/

But not by Merlin or this forum (which is for Asus hardware), which was my point.