What's new

VPN Tunnel goes down on it's own

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

jorgsmash

Senior Member
Hi all. This isn't the first time this has happened. I woke up this AM and my computer couldn't access the Internet. I have a few clients routed through a VPN on the router with Internet access blocked if the tunnel goes down. The tunnel is set to auto-start at boot. I never turn it off.

I logged into the router and sure enough the VPN tunnel is off. I checked the system logs for 'vpn' and this is what I found:

Code:
Sep 13 08:25:30 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:35 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:35 Skynet: [#] 308072 IPs (+1006) -- 1754 Ranges Banned (+46) || 10006 Inbound -- 2 Outbound Connections Blocked! [banmalware] [35s]
Sep 13 08:25:36 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:37 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:37 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:38 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:39 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:39 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:39 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:39 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:39 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:40 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:40 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:40 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:40 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:41 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:42 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:42 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:43 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:43 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:43 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:43 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:43 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:43 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:44 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:44 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:44 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:44 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:45 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:46 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:46 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:46 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:47 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:48 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:49 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:50 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:50 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:50 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:52 ovpn-client1[18666]: write UDP: Operation not permitted (code=1)
Sep 13 08:25:55 ovpn-client1[18666]: [openvpn2.vpnunlimitedapp.com] Inactivity timeout (--ping-exit), exiting
Sep 13 08:25:55 ovpn-client1[18666]: vpnrouting.sh tun11 1500 1553 10.200.0.50 10.200.0.49 init
Sep 13 08:25:55 openvpn-routing: Configuring policy rules for client 1
Sep 13 08:25:55 openvpn-routing: Tunnel down - VPN client access blocked
Sep 13 08:25:55 ovpn-client1[18666]: Closing TUN/TAP interface
Sep 13 08:25:55 ovpn-client1[18666]: /sbin/ifconfig tun11 0.0.0.0
Sep 13 08:25:55 lldpd[1295]: removal request for address of 10.200.0.49%26, but no knowledge of it
Sep 13 08:25:55 ovpn-client1[18666]: updown.sh tun11 1500 1553 10.200.0.50 10.200.0.49 init
Sep 13 08:25:55 ovpn-client1[18666]: SIGTERM[soft,ping-exit] received, process exiting
Sep 13 08:32:13 acsd: eth6: staying in current channel as txop is recovered with in time limit
Sep 13 08:42:27 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link DOWN.
Sep 13 08:42:27 kernel: br0: port 3(eth3) entered disabled state
Sep 13 08:42:30 kernel: eth3 (Ext switch port: 2) (Logical Port: 10) (phyId: a) Link UP at 100 mbps full duplex
Sep 13 08:42:30 kernel: br0: port 3(eth3) entered listening state
Sep 13 08:42:30 kernel: br0: port 3(eth3) entered listening state
Sep 13 08:42:32 kernel: br0: port 3(eth3) entered learning state
Sep 13 08:42:34 kernel: br0: topology change detected, propagating
Sep 13 08:42:34 kernel: br0: port 3(eth3) entered forwarding state
Sep 13 08:42:37 dnsmasq-dhcp[1188]: DHCPDISCOVER(br0) 64:95:6c:68:8d:90
Sep 13 08:42:37 dnsmasq-dhcp[1188]: DHCPOFFER(br0) 192.168.50.11 64:95:6c:68:8d:90
Sep 13 08:42:37 dnsmasq-dhcp[1188]: DHCPREQUEST(br0) 192.168.50.11 64:95:6c:68:8d:90
Sep 13 08:42:37 dnsmasq-dhcp[1188]: DHCPACK(br0) 192.168.50.11 64:95:6c:68:8d:90 LG-TV
Sep 13 08:43:17 kernel: ERR[update_qos_data_by_mac:3585] Failed to find udb entry by skb src-MAC!
Sep 13 08:43:17 kernel: ERR[update_qos_data_by_mac:3585] Failed to find udb entry by skb src-MAC!
Sep 13 08:43:17 kernel: ERR[update_qos_data_by_mac:3585] Failed to find udb entry by skb src-MAC!
Sep 13 08:44:00 kernel: ERR[update_qos_data_by_mac:3585] Failed to find udb entry by skb src-MAC!
Sep 13 08:44:00 kernel: ERR[update_qos_data_by_mac:3585] Failed to find udb entry by skb src-MAC!
Sep 13 08:44:00 kernel: ERR[update_qos_data_by_mac:3585] Failed to find udb entry by skb src-MAC!
Sep 13 09:00:06 Skynet: [#] 308072 IPs (+0) -- 1754 Ranges Banned (+0) || 10203 Inbound -- 39 Outbound Connections Blocked! [save] [6s]
Sep 13 09:16:31 hostapd: eth7: STA 2c:33:61:8e:84:34 WPA: group key handshake completed (RSN)
Sep 13 09:16:31 hostapd: eth7: STA 84:c0:ef:7f:82:87 WPA: group key handshake completed (RSN)

Any ideas why this is happening and what I can do to fix it?
Is there anything I can do that will check if the tunnel is on every 15 minutes or even every minute or something and if it's down start it back up?

Thank you all!
 

Similar threads

Latest threads

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top