What's new

ZyXEL GS1900-8HP 8-port GbE Smart Managed PoE Switch Reviewed

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Shonk

Senior Member
The review here didnt get updated with the specs and i found it hard to find them

http://www.smallnetbuilder.com/lanw...-8-port-gbe-smart-managed-poe-switch-reviewed

anyway my ZyXEL GS1900-24E arrived today

I managed to get out of the cli anyway here's the specs

I presume mine is the Realtek 8382M being the 24 port version



Code:
Switch# show  version
Loader Version   : 2011.12.39239.41394
Loader Date      : Jul 25 2013 - 09:27:53
Firmware Version : V2.00(AAHK.1)
Firmware Date    : Mon Oct 20 19:06:52 CST 2014
Switch# ping -h;sh${IFS}-a${IFS}telnet
BusyBox v1.00 (2014.10.20-11:07+0000) multi-call binary


# cat /proc/version
[B]Linux version 2.6.19 (jiucai2012_wang@realsil-9be1f83.realsil.com.cn) (gcc version 3.4.4 mipssde-6.03.00-20051020) #8 PREEMPT Mon Oct 20 19:11:36[/B] CST 2014

#  [B](Edited for cloudflare block u name -a) [/B]
[B]Linux (none) 2.6.19 #8 PREEMPT Mon Oct 20 19:11:36 CST 2014 mips unknown[/B]

# cat /proc/cpuinfo
system type             : [B]RTL8380[/B]
processor               : 0
cpu model               : MIPS 4KEc V7.0
BogoMIPS                : 498.07
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : yes
ASEs implemented        : mips16
VCED exceptions         : not available
VCEI exceptions         : not available

# cat /proc/meminfo
MemTotal:        [B]62416 kB[/B]
MemFree:         13720 kB
Buffers:          2160 kB
Cached:          22280 kB
SwapCached:          0 kB
Active:          15484 kB
Inactive:        15244 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:               0 kB
Writeback:           0 kB
AnonPages:        6312 kB
Mapped:           2756 kB
Slab:                0 kB
SReclaimable:        0 kB
SUnreclaim:          0 kB
PageTables:        408 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:     31208 kB
Committed_AS:    14676 kB
VmallocTotal:  1048404 kB
VmallocUsed:     13320 kB
VmallocChunk:  1032120 kB
#


# ps
  PID  Uid     VmSize Stat Command
    1 root        272 S   init
    2 root            SWN [ksoftirqd/0]
    3 root            SW< [events/0]
    4 root            SW< [khelper]
    5 root            SW< [kthread]
    6 root            SW< [kblockd/0]
    7 root            SW  [pdflush]
    8 root            SW  [pdflush]
    9 root            SW< [kswapd0]
   10 root            SW< [aio/0]
   11 root            SW  [mtdblockd]
   24 root            SW< [loop0]
   30 root            SWN [jffs2_gcd_mtd3]
   33 root            SWN [jffs2_gcd_mtd4]
   44 root            RW< [WA Monitor Thre]
   56 root            SW< [LinkMonIsrThrea]
   57 root            SW< [Port Monitor Th]
   58 root            SW< [Port Security T]
   59 root            SW< [ACL Shutdown Th]
   64 root            SW< [Fiber Monitor T]
   65 root            SW< [Ext GPIO Thread]
   73 root            SW< [STP RX Thread]
   74 root            SW< [MSTP FSM Thread]
   75 root            SW< [MSTP Routine Th]
   76 root            SW< [MSTP Tick Threa]
   80 root            SW< [LACP RX Thread]
   83 root            SW< [IGMP RX Thread]
   86 root            SW< [DOT1X RX Thread]
   87 root            SW< [DOT1X RADIUS RX]
   88 root            SW< [DOT1X ARP RX Th]
   94 root            SW< [Voice VLAN Time]
   97 root            SW< [LACP RX Thread]
   98 root            SW< [TX Thread]
   99 root            SW< [Timer Thread]
  102 root            SW< [RLDP RX Thread]
  103 root            SW< [RLDP TX Thread]
  104 root            SW< [RLDP Enable Thr]
  114 root        212 S   klogd
  194 root        288 S   syslogd
  198 root       1136 S   polld
  200 root       1160 S   ksid
  202 root       1044 S   zon
  205 root        284 S   /bin/sh
  206 root        296 S   sh -c /bin/cli
  211 root       3076 S   /bin/cli
  214 root       1728 S   boa -c /home/
  215 root        888 S   boa -c /home/ -s
  216 root       1160 S   ksid
  233 root        576 S   dhcpcd -i Switch -t 315360000
  420 root        236 S   inetd
  427 root        224 S   /bin/telnetd
  428 root       3544 S   /bin/cli -a telnet -H 192.168.0.31
  480 root        300 S   sh -c ping -c 4 -h;sh${IFS}-a${IFS}telnet
  482 root        356 S   sh -a telnet
  483 root        292 R   ps
 
Last edited:
I understand that this topic is from a while back, but I was wondering if the GS1900 models support SNMP 64-bit counters?

I can't really find any solid information on it.


Sent from my iPhone using Tapatalk
 

Sign Up For SNBForums Daily Digest

Get an update of what's new every day delivered to your mailbox. Sign up here!
Top