Menu
What's new
By:
Filters Better Search

Recent content by Steve1985

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. S

    What do the IPTV settings do?

    I am trying to get IPTV working. This used to work with another modem device but it doesn't with the current modem i am using. IPTV VLAN VID 4 set in LAN---->IPTV Internet VID 6 set in LAN---->IPTV I am trying to understand what these settings do exactly in terms of bridging tagging untagging...
  2. S

    Enable IPTV vlan 4 port 4 RT-AC56U

    I have a dsl broadband bonding connection provided by the Dutch ISP xs4all. Their VLAN settings are: Inet: VLAN 6 IPTV: VLAN 4 Because i want the WAN IP available on this router I use a Zyxel SBG3500-N in bridge mode. This works however it only works if i DONT set the VLAN setting for VLAN 6...
  3. S

    iOS devices won't connect to R7800 (dd-wrt)

    Hi, I hope someone here can help me. Both iOS devices (iPad/iPhone with iOS 10.2) can't connect to my R7800 with Firmware: DD-WRT v3.0-r31120M kongat (01/10/17) anymore. They keep asking for the password even if i give it in correctly. The encryption is set to WPA2 AES. The 2.4ghz band has...
  4. S

    New - Asus Wireless AC1900 repeater with USB 3.0 and 5 Gigabit Ethernet ports

    @Merlin is your firmware compatible with this or will it be in the future? Currently it does not support guest network and i would really like to add a guest network to this device as it's placed far more central then my main router. Steve
  5. S

    Asus RT-AC56U speed/high ping issues

    Hi Merlin, Thank you for the reply. Can you please provide me with the steps to do this or a link where i can find how to do this? So far what i've tried hasn't worked for some reason. Steve
  6. S

    Asus RT-AC56U speed/high ping issues

    I have an Asus router with the latest Merlin firmware. However since last week my speed is very low (i have a contract for 200mbit/sec) and the ping is extremely high around 200ms. I first thought i had a faulty cable modem provided by my ISP but after several tests am starting to think it's...
  7. S

    Heavy traffic in traffic monitor with no machines connected to router

    Hi Merlin, Thanks for the reply. I believe NAT accelleration was switched off becuase it was incompatible with something else. I stuck to the 55 version because i needed to overclock the cpu because of the use of VPN. I believe the last news was that this isn't possible anymore in the 56...
  8. S

    Heavy traffic in traffic monitor with no machines connected to router

    Yesterday i noticed that the traffic in the traffic monitor is showing extremely high traffic. I stopped downloading before i noticed it and there wasn't any heavy traffic being used. So i started to investigate a little bit. Switched off all machines apart from my iPhone closed all apps on my...
  9. S

    iPtables routing one specific IP outside VPN

    Hi Merlin, I found the routing in the webUI very nice! could you eloborate a litle bit? do i have to make seperate rules for every single client or can i make one rule that applies to all clients. And how do i say 192.168.1.* should be allowed to acces <IP university> outside tunnel?
  10. S

    iPtables routing one specific IP outside VPN

    Hello, I would like to be able to allow one specific IP adress to be accessed outsite the VPN (using OpenVPN, AirVPN in MerlinWRT latest firmware 55). So all other traffic should be handled within the tunnel except for connecting to that specific IP. This has to do with accessing the online...
  11. S

    Rss feed in download manager

    hi, I am looking into the following and wonder if anybody else is using the download manager in this way. I would like to sort of automate the download manager in my asus rt-ac56u with merlin firmware. I know it's possible to install transmission however would prefer to use the standard...
  12. S

    Overclocking RT-AC56U

    Hi, i hope someone can help me. I have a RT-AC56U with bootloader 1.0.2.6 and the latest Merlin firmware. I have tried overclocking the router using the commands in this thread however whatever i try i cannot get it to work. All values i put in for the RAM apart from the standard 533 come back...
See more
Top