Menu
What's new
By:
Filters Better Search

Search results

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. K

    Does every config change prompt a reboot/reconnect?

    Ya... I just replaced my old AX86U with an AX88U Pro. The AX86U just died one day... as in, it was working and then the next hour it was dead no power no response nothing. So I picked up an AX88U Pro. The AX86U had the Merlin software on it and I felt that I was in there making changes all...
  2. K

    Does every config change prompt a reboot/reconnect?

    I used the DHCP change as an example, but it feels like anytime I touch a setting in this new router it has to do almost a full restart. Maybe it's just my perception but I feel like when I had my AX86U, it didn't have to drop/restart all the time. I look at the AX88U and I feel a browser...
  3. K

    Does every config change prompt a reboot/reconnect?

    So this is because of the stock Asuswrt software then... the Merlin software doesn't suffer from this annoyance?
  4. K

    Does every config change prompt a reboot/reconnect?

    Is this typical behavior? I can't remember this happening before with any of my other ASUS routers. I feel like everytime I change any setting in my ASUS router it drops all the connections and almost essentially reboots. With my previous router, I want to say that I was able to do config...
  5. K

    AX86U dead (no power)

    Can add mine to the list... just stopped working this morning. One moment it was there and the next moment... dead. Luckily I had an AX68U as an AiMesh node that I could repurpose as the main router until I can buy a new router.
  6. K

    AiProtection and Onedrive crashing router?

    Yup... I figured that part out (and eventually turned that off). The part that was "odd" was that it was crashing the router when it was on. Blocking OneDrive accidentally is one thing, but bringing down the router is what I was curious about. Once I figured out what was happening, I had 5...
  7. K

    AiProtection and Onedrive crashing router?

    The following things are installed... Skynet scribe connmon scMerlin uiScribe The error flooding the log were these... kernel: *** ERROR: [send_redir_page:625] # redir_url=http://192.168.17.1:80/blocking.asp?cat_id=56&mac=AD558703AA27&domain=skydrivesync.policies.live.net When I turned off...
  8. K

    AiProtection and Onedrive crashing router?

    I guess that would help... AX-86U running Merlin 386.7_2
  9. K

    AiProtection and Onedrive crashing router?

    Has anybody seen any problem like this where if I turn on parental controls to prevent file sharing it causes AiProtection to go wild and eventually crash the router? It seem like Onedrive and parent file controls don't get along. It seems like to cause the router to reboot every 4-5 minutes.
  10. K

    ctrl channel 1 SB not aligned with existing 40BSS

    i'd forget my head if it wasn't attached. AC3100 running 384.15
  11. K

    ctrl channel 1 SB not aligned with existing 40BSS

    I'll admit... I've lived a happy life with my router set to auto channel selection with the 20/40/80 options filling up the airwaves. Everything has been fine. Well, I checked in my log files the other day and it was filling up with log spam about channels moving around because of congestion...
  12. K

    Blank page when logging in

    Add my name to the list... Did a service restart_httpd and then I could at least login, but after login I get the same blank white page.
  13. K

    TP Link Range Extenders Smart Enough to Avoid Loop?

    I thought I would circle back to drop my feedback. I've been experimenting with these access points probably too much... But I think I finally figure out my problem. To avoid signal overlap and loop... I basically had to use the control panel to block the other device from connecting. It solved...
  14. K

    TP Link Range Extenders Smart Enough to Avoid Loop?

    It sounded like a good idea... but I think these extenders are going back in the box as I get higher speeds without them. I didn't want to splurge on those expensive access points, but maybe I have to.
  15. K

    TP Link Range Extenders Smart Enough to Avoid Loop?

    Throughput was horrible... 8-10mbps vs 36mbps. I'd be better off without the extenders... :mad:
  16. K

    TP Link Range Extenders Smart Enough to Avoid Loop?

    I tried using the same SSID for all of them and while I can prove it, I don't think it worked. Momentary blackouts lead me to believe that they were talking to each other instead of the main router. So I am currently going to try the hidden SSID for the extenders to connect to and see how...
  17. K

    TP Link Range Extenders Smart Enough to Avoid Loop?

    I just bought two AC1200 range extenders from TP Link. As I was setting up the first one, I set it up to use the same SSID as my primary wireless. That was cool and easy and all was well. I was in the middle of setting up the second one when I began to wonder if these things were smart enough...
  18. K

    Access Points

    I have an Asus Ac3100 and I was looking for ways to extend my wifi coverage. The AI-Mesh caught my attention, but it looks for me to get that to work, I have to buy full-in ASUS wifi routers for it to work. I don't need the router part cause I already have the AC3100 hooked up to my cable...
  19. K

    AC3100 and Gigabit

    Just to circle back... I installed a video card in my computer (same computer, but now using a video card instead of the onboard motherboard video) and BAM. I'm now hitting 935Mbps. Not sure what a video card has to do with the onboard network adapter...
  20. K

    AC3100 and Gigabit

    Tried updating the driver... no dice. I even tried disabling the eco-friendly power saving mode that it has, no luck. I'm going to see if I can acquire an additional NIC card and see if that does anything or if the motherboard/CPU are just too old. That is pretty bad though... the port...
Top