Maxiller
Occasional Visitor
Hey there.
378.51 @ ac68u
It seems, new release brokes something in DualWAN when two Ethernet connection are in use.
The second wan (which is vlan3) just doesn't abtain an IP address.
That can be done manually of course, but no other procedures works afterwards anyway: address assigning, routes updates, etc.
Everything was fine here on 376.x.
378.51 @ ac68u
It seems, new release brokes something in DualWAN when two Ethernet connection are in use.
The second wan (which is vlan3) just doesn't abtain an IP address.
That can be done manually of course, but no other procedures works afterwards anyway: address assigning, routes updates, etc.
Code:
admin@asus:/tmp/home/root# date; ip addr show vlan3
Sun Mar 22 11:44:19 GMT 2015
7: vlan3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether e0:3f:49:95:11:22 brd ff:ff:ff:ff:ff:ff
admin@asus:/tmp/home/root# udhcpc -i vlan3
udhcpc (v1.20.2) started
Sending discover...
Sending select for 192.168.35.2...
Lease of 192.168.35.2 obtained, lease time 2419200
admin@asus:/tmp/home/root# date; ip addr show vlan3
Sun Mar 22 11:44:34 GMT 2015
7: vlan3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether e0:3f:49:95:11:22 brd ff:ff:ff:ff:ff:ffEverything was fine here on 376.x.
Last edited:
