[ 3734.932826] usb 1-1.5: new high-speed USB device number 4 using dwc_otg
[ 3735.068435] usb 1-1.5: New USB device found, idVendor=2040, idProduct=6513
[ 3735.068456] usb 1-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3735.068467] usb 1-1.5: Product: WinTV HVR-980
[ 3735.068477] usb 1-1.5: SerialNumber:
[ 3736.149146] media: Linux media interface: v0.10
[ 3736.174850] Linux video capture interface: v2.00
[ 3736.191991] em28xx: New device WinTV HVR-980 @ 480 Mbps (2040:6513, interface 0, class 0)
[ 3736.192007] em28xx: Audio interface 0 found (Vendor Class)
[ 3736.192015] em28xx: Video interface 0 found: isoc
[ 3736.192022] em28xx: DVB interface 0 found: isoc
[ 3736.192272] em28xx: chip ID is em2882/3
[ 3736.458845] em2882/3 #0: EEPROM ID = 1a eb 67 95, EEPROM hash = 0x03ab27dd
[ 3736.458858] em2882/3 #0: EEPROM info:
[ 3736.458864] em2882/3 #0: AC97 audio (5 sample rates)
[ 3736.458870] em2882/3 #0: 500mA max power
[ 3736.458879] em2882/3 #0: Table at offset 0x24, strings=0x1e82, 0x186a, 0x0000
[ 3736.458890] em2882/3 #0: Identified as Hauppauge WinTV HVR 950 (card=16)
[ 3736.468569] tveeprom 3-0050: Hauppauge model 65201, rev A1C0, serial# 199***
[ 3736.468587] tveeprom 3-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[ 3736.468599] tveeprom 3-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[ 3736.468609] tveeprom 3-0050: audio processor is None (idx 0)
[ 3736.468617] tveeprom 3-0050: has radio
[ 3736.468626] em2882/3 #0: analog set to isoc mode.
[ 3736.468632] em2882/3 #0: dvb set to isoc mode.
[ 3736.469208] usbcore: registered new interface driver em28xx
[ 3736.503837] em2882/3 #0: Registering V4L2 extension
[ 3736.521549] tvp5150 3-005c: tvp5150 (4.0) chip found @ 0xb8 (em2882/3 #0)
[ 3736.521564] tvp5150 3-005c: tvp5150am1 detected.
[ 3736.629562] tuner 3-0061: Tuner -1 found with type(s) Radio TV.
[ 3736.648342] xc2028 3-0061: creating new instance
[ 3736.648360] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[ 3736.648953] em2882/3 #0: Config register raw data: 0xd0
[ 3736.649591] usb 1-1.5[B]: Direct firmware load for xc3028-v27.fw failed with error -2[/B]
[ 3736.649606] xc2028 3-0061: Could not load firmware xc3028-v27.fw.
[ 3736.649931] em2882/3 #0[B]: AC97 vendor ID = 0xffffffff[/B]
[ 3736.650310] em2882/3 #0[B]: AC97 features = 0x6a90[/B]
[ 3736.650317] em2882/3 #0: Empia 202 AC97 audio processor detected
[ 3737.253093] em2882/3 #0: V4L2 video device registered as video0
[ 3737.253109] em2882/3 #0: V4L2 VBI device registered as vbi0
[ 3737.253124] em2882/3 #0: V4L2 extension successfully initialized
[ 3737.253133] em28xx: Registered (Em28xx v4l2 Extension) extension
[ 3737.269924] em2882/3 #0: Binding audio extension
[ 3737.269938] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 3737.269943] em28xx-audio.c: Copyright (C) 2007-2014 Mauro Carvalho Chehab
[ 3737.270209] em2882/3 #0: Endpoint 0x83 high-speed on intf 0 alt 7 interval = 8, size 196
[ 3737.270219] em2882/3 #0: Number of URBs: 1, with 64 packets and 192 size
[ 3737.273760] em2882/3 #0: Audio extension successfully initialized
[ 3737.273783] em28xx: Registered (Em28xx Audio Extension) extension
[ 3737.307213] em2882/3 #0: Binding DVB extension
[ 3737.566459] xc2028 3-0061: attaching existing instance
[ 3737.566474] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[ 3737.566481] em2882/3 #0: em2882/3 #0/2: xc3028 attached
[ 3737.566488] DVB: registering new adapter (em2882/3 #0)
[ 3737.566508] usb 1-1.5: DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
[ 3737.571193] em2882/3 #0: DVB extension successfully initialized
[ 3737.571212] em28xx: Registered (Em28xx dvb Extension) extension
[ 3737.587082] em2882/3 #0: Registering input extension
[ 3737.632931] Registered IR keymap rc-hauppauge
[ 3737.633588] input: em28xx IR (em2882/3 #0) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc0/input0
[ 3737.633715] rc rc0: em28xx IR (em2882/3 #0) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/rc/rc0
[ 3737.636213] em2882/3 #0: Input extension successfully initalized
[ 3737.636222] em28xx: Registered (Em28xx Input Extension) extension