Advanced search results
Better search
Select: Thread titles
Keywords: VLAN
Posted by:
Search forums: All forums
Results count: 854
Select: Thread titles
Keywords: VLAN
Posted by:
Search forums: All forums
Results count: 854
-
D- 1 Posts - docfiddleI have set up a VLAN guest network on an Asus BE7200 router using its Guest Network Pro, isolated from main network per the "intranet access" setting. The guest SSID is propagating through an AIMesh network of nodes (2 AC3100, an AX1800S, and an AC68U all with the latest firmware.) Because a...
-
- 2 Posts - faxAnyone knows if there is a difference between the 802.1Q (VLAN) configuration in the WAN menu and the LAN-IPTV option in the LAN menu? It seems that both can perform the same function of tagging internet traffic with a specific VID or VLAN ID. Both works if configured with my Internet service... -
S- 2 Posts - SteveMI have read that for OpenReach FTTP the VLAN isn't needed. I'm hoping this is the case. I am using an RT-AX58U router and the WAN port is on eth4 However, in case it isn't I was looking at scripting a /jffs/script/services-start to set up the VLANs based on the need for 101 for OpenReach and...
-
C- 2 Posts - CornfieldWinSimply put, I want to bridge at DNS application level 7 using dnsmasq servers, all local routers, subnets and vlans into one internal DNS protocol derived namespace without regard to external DNS on the Internet. Note: this isn't just a specific configuration objective but rather an...
-
C- 6 Posts - CornfieldWinI have two prototype Guest Pro vlans, one for cafe style login and one for IOT use case, set up on my AX88U Pro with Merlin 3006.102.5 (autoupdate) and likewise the bulk of AMTM scripts and services including unbound, YaxDHCP, Diversion, and Skynet , and others for curiosity. Very nice, will...
-
I- 7 Posts - i5JsHi everyone, I'm running an ASUS AXE16000 with Merlin firmware and have several VLANs set up at home. One of them is VLAN 52, which I use with Guest Network Pro for a dedicated WiFi network for the kids. Everything works fine when I connect the router to my switch (a Cisco SG300-28) using a...
-
N- 1 Posts - nikflatronHello everyone, My internet provider uses the setting VLAN ID 0 prio1. However, I'm not allowed to enter VLAN ID 0. I'm asked to enter a value between 2 and 4094. Asuswrt or Merlin doesn't matter. Is there a way around this? Thanks for your help.
-
- 1 Posts - horasjeyHello all, Greetings, I'm from Indonesia Is there a layer 2 mode wireless router that supports VLAN for under $10? Greetings, I'm from Indonesia
-
J- 6 Posts - jksmurfAs title really, does creating a dnsmasq-x.conf.add (where x is the VLAN Number in order of adding in GNP, not the VLAN ID) in jffs/configs/ still work if your VLAN has the same subnet as the Primary LAN or should you just use the WebGUI (YazDHCP or the Built-in One) for DHCP assignments. Mine...
-
- 3 Posts - Jack-Sparr0wIt's working, just wondering if this setup is alright. I have to use guest network in my setup -
S- 10 Posts - StRHi All! I am rather new to VLANs, so, I am considering my options for the upgrade of RT-AC86U, and would like to find out which of the Merling-supported ASUS routers would give the functionality described below. (I am open to both AX and BE, primarily 88/86 types of routers, including their Pro...
-
R- 7 Posts - r80xcoreAsus ZenWiFi XT8 VLAN/SSID Bridge Script (Asuswrt-Merlin / Gnuton) I really wanted working VLANs on my Asus ZenWiFi XT8 mesh setup and as I couldn't find any good ones the only alternative was to make one. I'm not a coder but I'm stubborn and I love to read up and learn new stuff. So I sat down...
-
- 11 Posts - UnscathedHey all, Just looking for some advice before I take a dive in. I'm currently looking at the GT-AXE11000, however, this model doesn't support setting a VLAN ID for internet access. I came across asuswrt-merlin, from my understanding, this would allow for VLAN ID setup via CLI but haven't been...
-
K- 11 Posts - k9750is it possible to enable VLAN tab in gui for RT-BE92U running on asuswrt-merlin 3006.102.5 ?
-
V- 3 Posts - vector01Hi everyone I'm new here. Relatively new to home networking. I have a RT-BE96U running ASUS firmware version: 3.0.0.6.102_37849. I have 3 Tapo/TP-Link Wi-Fi cameras on a guest network pro SSID/VLAN (not on main subnet). I want to be able to access via LAN, but I don't want them connected to...
-
- 16 Posts - JoeHzWe just took the plunge on home automation with some Amazon Echo devices and KASA smart plugs. 1) So I went and created an IoT network in GuestNetworkPro with its own VLAN ID and subnet and discovered a hiccup. The plugs all worked fine when they were connected to the main router (An...
-
B- 1 Posts - bbungeThis topic has been discussed several times before in these forums. One solution is to set up the RPI with the Ethernet connected to the LAN and the WIFI connected to the guest WIFI. This procedure will let you connect the RPI to the LAN Ethernet with a single cable and have IP addresses on the...
-
T- 7 Posts - TekkoHi, just got this new toy in and went straight to flashing Merlin. Now trying to set something up which I don't even know is possible for this device so hoping someone can chime in. I've set up 2 guest networks alongside my main network (VLANs 51 and 52). VLAN 51 has my Home Assistant server...
-
U- 11 Posts - utteI'm trying to set up three isolated networks (VLANs) on an ASUS RT-AC86U running ASUSWRT-Merlin 386.10_0: br0 (Home) – default LAN br1 (Guest) – for guests, works fine br2 (IoT) – this one is problematic My goal: Each VLAN should have: A separate subnet and DHCP range Internet access...
-
S- 2 Posts - styxHello, I have a axe16000, Merlin 3006... lastest installed. I have created a guest vlan (52) on wifi. and the intranet wifi (no change vlan1) both is working fine on the asus router. (if connected to "52" wifi, receive ip 192.168.52.xx and to "1" ip 192.168.1.xx) now I want to extend the wifi...
-
S- 1 Posts - snovvmanI am running three AX86U Pro mesh in AP mode, behind a dedicated firewall/router. 3006.102.4 Merlin. Once I added a guest network pro profile, I noticed that a VLAN ID was created but no DHCP or subnet configuration ("same subnet" turned off because I want to isolate). Naturally, the clients...
-
M- 1 Posts - mastersHello! Does anyone know if ZenWiFi AX Hybrid XC5 support vlans on a WAN port (maybe via IPTV tab or command line tools)? My provider is using vlan + pppoe authentication. I can't find any useful information about this router, maybe someone have it and can check. I will be very appreciate for this.
-
L- 6 Posts - liugHere is the setup: - 2.5G managed switch in Room 1. The switch has WAN as vlan tag 100 and LAN as vlan tag 200. - Asus RT-AX86U PRO is in room 2. There is only one ethernet cable running between the two rooms. The plan is to make this ethernet connection as "trunked" with both vlan 100 and 200...
-
- 8 Posts - Seth HarmanAfter participating in a few threads regarding Guest Network Pro/VLANs I've discovered I'm still a bit confused as to what Asus is doing. In regards to VLANs here's what Asus says: 1). By creating a Guest network pro, a VLAN will be created as well in VLAN settings. 2). VLAN supported models... -
- 6 Posts - delikidWhile searching for information on VLAN setup, I came across an article from ASUS, "What is VLAN and how to setup in ASUS Wireless Router?" [https://www.asus.com/us/support/faq/1049415/] dated 2025/05/05. In the notes on that page it states "The following feature requires router firmware...
-
B- 21 Posts - BoostOverGood morning everyone. I currently have the latest available FW installed (3.0.0.6.102_37839), but the problem arises with all the last 3 firmwares released by Asus. I can't get an IPv6 address. Even though the LAN is apparently assigned an IPv6 address....only apparently. In PPPoE everything...
-
F- 1 Posts - Fresh5208Hi! I have the RT-AX56U router with newest Merlin firmware. I just got IPTV STB from my ISP, which needs to have both VLAN 839 and 838 (Orange Poland) on a single port to work properly. Any ideas how to configure it? I know it’s not possible via GUI, so I’m hoping it’s possible via scripts that...
-
C- 1 Posts - cysio528Hello everyone, Background: I currently have Asus RT-AX68U router and I would like to set separate VLAN for my IoT devices. In theory I guess I could set up Guest Network just for that, however I would also like to have Home Assistant server set up in that network. I would like to be able to...
-
M- 3 Posts - meganesaniI'm trying to configure dual-WAN on the router and I'm having a problem. I connect both connections, but each provider uses a different VLAN ID: one uses 10 and the other 20. If I go into the WAN settings and change the VLAN ID to 802.1Q, it doesn't matter which interface I have selected; it...
-
S- 3 Posts - ssm1234(I’ve checked various forum posts and Asus web sites to no avail…) I’m trying to create a network topology (see picture below) with an AX11000 Pro router and managed switches (two TP-Link SG108E). I’ve a 802.1Q VLAN (created a VLAN_10 profile in the router) for untrusted—mostly IoT—devices to...
-
- 6 Posts - Seth HarmanI'm relatively new to VLANs so forgive me if this is a dumb question, but I've been searching everywhere for an answer to this question and I can't find one. I've upgraded my RT-AX88U Pro (main router) to the firmware that supports Guest Network Pro (the AiMesh nodes do, as well) and I've...
-
- 4 Posts - mosesman831My current situation requires a VLAN for my NVR, which should still be accessible from the main LAN. The current Asuswrt Official firmware on my GT-AXE16000 does not seem to contain this function, will upgrading to Merlin allow me to setup these inter-vlan routing? thank you so much. -
T- 4 Posts - todeshornFirst and foremost, I want to express my sincere gratitude for all the incredible work Voxel has done to provide a powerful alternative to the limited stock firmware. I also deeply appreciate the time and effort the community volunteers put into supporting Voxel users—your dedication doesn’t go...
-
- 20 Posts - smanHi there, I plan to upgrade to WIFI 7 and use the VLAN too. I am not an advanced user and need recommendations. I have to mention from the start, that I'm not expressly interested in wireless speed as much as wired fluidity matters. In the attached sketch you can see the existing topology...
-
R- 6 Posts - rvcjewI have a network as follows: main router (AX86U Pro) 192.168.x.x AI Node (2nd AX86U pro) Have guest network pros with 2 current vlans of 52, 53 Have about 30 clients in general (don't know if that mattes) My issue is we now need to add some clients all wired to a IPSEC VPN and the AX86U PRO...
-
J- 20 Posts - jksmurfHi, Unnecessarily complicated explanation alert, all pretty new to me ... I am in the process of planning future upgrades of my ISP at a remote site (to above 1GB) and with a few planned 2.5GB WAN/LAN routers/nodes I am in the market for a 2.5GB Switch. The question I have (I will explain the...
-
P- 2 Posts - purplemanHi everyone, I have 3 vlans (501, 502 and 503) across two Asus routers, both running Merlin 3006 (all 3 are guest networks). On one of the routers, I want to connect a device to one of the LAN ports to be part of the main network only (vlan 0 or "untagged") and not any of those 3 vlans. Is this...
-
- 3 Posts - i0ntempestHi, I have a BE88U with merlin 3006.102 and I have created a guest VLAN with DHCP. The system assigned it SDN index 5 (as I have `dnsmasq-5.conf`) and bridge device `br56`. I would like some clarifications on how these numbers are decided so I can write reliable scripts to operate on this...
-
J- 3 Posts - JimSOver the years have added a pfsense box and recently a managed switch (Dlink) to the home network. I have the RT-AC68U as an AP (have two of them in mesh to cover more area). Running latest Asus firmware. Would like to have a guest wifi isolated from main network. I can enable guest network...
-
D- 14 Posts - docluv01Hi Guys, I had a question about VLANs. I have an AX88U Pro setup as a Router, and connected to this I have (2) RT-AC3100's as AiMesh nodes. The nodes are both connected to different parts of my house via a wired connection. All are on the latest/greatest Merlin official releases. On my...
-
S- 7 Posts - Sdr-99xrsHello all. I am super confused but the guest network pro. I created a vlan, made it use DHCP, subnet mask allows 29 clients, with a random number for vlan id. I clicked set AP isolated . I also remember clicking something on the vlan tab isolating the ports. What I don’t understand is the...
-
J- 22 Posts - jksmurfI appreciate this has been discussed many, many times before, I am aware of the prior posts, so to be clear this is not a request for fixing it. RMerlin has repeatedly stated this Client List is closed source and he cannot fix it (I am running Merlin FW 3006.102.4_alpha2), hence posting in this...
-
J- 9 Posts - jksmurfHi, I thought I would document my experience setting Guest Network Pro up, so other folks at my (basic) level of technical expertise can see what it looks like and the various gotchas. I'm happy for feedback on what I should have done or changes (but please say why and what it is for)… I was...
-
J- 1 Posts - jksmurfI realise this is a general (smart home) discussion forum, but before I go ask questions in Home Assistant forums for ESPHome, I thought I would see if anyone can give me a few pointers. I run HA (Home Assistant) and have some small H&T (Xiaomi) devices that I wanted to connect more reliably in...
-
Z- 4 Posts - ZimSuppose I have two of the same routers, both running the 3.0.0.6 firmware w/VLAN support. If I configure one as router and another as AP, will the VLANs from the router translate to the AP automatically? I think I would need to configure the ethernet port that connects to the AP as Trunk...
-
M- 4 Posts - meganesaniHello, I just upgraded my equipment with this router, which replaces an AC87U, I've changed switches, etc. The question is this: my internet provider requires the VLAN tag to be 10. There's no problem; you go to LAN, go to TV, and set manual values. But this forces you to use the 10GB WAN port...
-
C- 3 Posts - cputoasterJust wanted to give another data point for others. I am switching over from 1Gb WAN -> 3x AX88u to 25Gb WAN -> Linux router (Debian, nft, dnsmasq) -> 3x BT10, always using 10Gb ethernet backhaul. While still waiting for the the WAN to be upgraded, I am happy to say that the BT10 works without...
-
U- 2 Posts - userspacedI'm trying to do a bit better segregation of things in my network. I have a unifi gateway and switches that I have vlans configured for wired devices. This is all working fine. I wanted to tackle the wifi side of things. I currently have an RT-AX58U running in Access Point(AP) mode / AiMesh...
-
F- 5 Posts - fkhan6601I'm trying to setup vlans on my gt ax16000 running as an AP for Opensense. My network has Opensense connected to a gt ax16000 and gt ax11000 both running as APs. I know Merlin has vlan support for router mode, but i need AP mode vlan support. Thanks in advance.
-
S- 23 Posts - Sandman1Hello im currently running a double nat issue, and i was wondering if i could create two vlans(one for my self, and parents) on my asus router and connect them to two differenet ssids for vlan tagging to take place and prevent a double nat issue my vlan knowledge specifcally with...
-
M- 5 Posts - mardymarvinI am running the basic Asus firmware Version 3.0.0.6.102_34336-gc04af06_403-gd851b I have created a VLAN and assinged it the network I created in the Network pro section. The VLAN seems to be working all ok giving out IP etc and on the subnet of the VLAN. The issue I have is now is the...
-
B- 7 Posts - BuffleheadGood afternoon, I have two managed switches on my one-armed router network, a Netgear GS305e (5 port), and a GS305e (8 port). I have created an Admin VLAN (10), which is one of four VLANS trunked from my Edgerouter X to switch port 1 on each of my Netgear switches. The switch uplink ports on...
-
A- 3 Posts - arewhyHello folks, The VLAN Switch Control settings for the Default IoT network are not being applied to the RT-BE88U AiMesh router with Merlin or ASUS 3006.102_37xxx firmware. The issue was not present on the GT-AX 6000 with ASUS 3006.102_34810. I don’t know if the issue was introduced when ASUS...
-
A- 61 Posts - agbommaritoFor some time now, I've been trying to "harden" my home network with fully isolated IOT and Guest networks using VLANs. I have two RT-AX86Us; one is the router and the other is either a mesh node or an AP. When the second RT-AX86U is setup as an AP, I use a script posted by Maxbraketorque...
-
I- 5 Posts - IRXHello Folks, I am experiencing Issue with VLAN Configuration on RT-BE88U (AsusMerlin) I recently upgraded my network with the Asus RT-BE88U and set up three VLANs for segmentation: VLAN54 - Main Devices (Wi-Fi) VLAN55 - TV (Ethernet, LAN2) VLAN56 - Streaming Box (Ethernet, LAN3) Steps Taken...
-
S- 2 Posts - sunlyAsus RT-BE86U, Stock Firmware, Guest Network pro, WLAN is not activated: The receiver's LAN connection should receive a DHCP-address from the VLAN network (192.168.55.44), but always gets an IP address from the main network (192.168.50.44). How can I solve the problem?
-
W- 4 Posts - WayloI have my IOT devices isolated on a VLAN using YazFi. Client isolation is ON for this network. On occasion, I will encounter a device that requires client isolation to be turned off when adding it. I believe it's because the device needs direct access to the phone app and vice versa. I could...
-
D- 17 Posts - deviceunifierUPDATE: Inter-VLAN connectivity is possible by introducing new iptables rules. This was quite simple and has been working well. However, the new rules aren't persistent, they get wiped and have to be added again every time the router reboots or is turned off. Including the refresh it does after...
-
Y- 3 Posts - YRTFSTested on RT-AC86U(asus-wrt 3.0.0.4.386_51955) and RT-AX53U(asus-wrt 3.0.0.4.386_69086) both factory reset for good measure and simply connected to dynamic IP from modem. The first red flag that comes up is that, immediatly after activating the respective first 2.4ghz and 5ghz guest networks...
-
N- 4 Posts - nuuzaaHello, with the normal asus router software I can add vlans with the GUI. See image attached. My question is now, if I have the same GUI with all options when I install Merlin. I read that merlin have all the normal software have and more. So the vlan GUI should be there, when I install...
-
S- 3 Posts - StickyStigi am using AX88U Pro as my main router. i have seperate network set up for kids devices and cameras etc another network (i used the new Guest Network Pro to set all this up). I want to buy one or two aimesh nodes added to network so that i can have better access to wifi at the back of house...
-
M- 2 Posts - mmjlmjlI installed an RT-BE88U, installed the latest Merlin firmware on it (release 3006.102.2_2). During the wizard I choose the AP functionality, it then asks for an SSID for normal and IOT network, the latter cannot be skipped. Once up and running I want to define my own VLANs and delete the IOT...
-
- 4 Posts - copperheadI’m encountering an issue with inter-VLAN communication on my ASUS RT-AX88U Pro router. Here's the setup: Router's main IP: 192.168.1.1 Target device: 192.168.2.45 (on Guest Network 1, configured via YazFi) Goal: I want to run a script on the router (192.168.1.1) that occasionally needs to send... -
- 3 Posts - PlompieHi All, been a while since last been here as everything was running super smooth for years. Since a few weeks I’ve switched ISP’s. Both at a 1 Gbps subscription and still over the same fiber but other service provider. This new provider (Odido Netherlands, former T-mobile) uses a VLAN for... -
C- 3 Posts - CornfieldWinAsus Guest Network Pro router interacting over AiMesh with ASUS non-vlan node Considering new ASUS AX88U Pro as front end router to existing GS-AX5400 move to node status. I will update with subsequent experience. The fallback is to put the AX5400 in WAN NAT mode behind a LAN port on the AX88U...
-
P- 3 Posts - purplemanHi everyone. When I enable guest network 1 on my AC68U (on the 2.4 band only) with access intranet disabled it creates a new virtual interface called wl0.1 and it appears to set up a 501 vlan and a new bridge (br1) that includes wl0.1 (guest network) , eth0.501 (wan), eth1.501 (2.4ghz...
-
S- 6 Posts - SDF07SI have RT-AX86U Pro. I want features from existing Merlin firmware, but also VLAN support from newer ASUS firmware releases that don't have Merlin versions. Supposedly, there is a SSH script on how to use existing Merlin firmware to create VLAN's, but I can't find it. I can only find a guide...
-
S- 6 Posts - SDF07SWhat are some good PCIe NIC's that support MACSec, VLAN tagging, have secure hardware isolation, and good driver support?
-
A- 4 Posts - AlexP11223Hi, I am still struggling to figure out how to make a basic router-on-a-stick setup as described in https://www.snbforums.com/threads/router-on-a-stick-with-ax88u-pro-and-ubiquiti-flex-mini-2-5g.93175/ In short, I want to have modem -> managed switch -> router, and several other devices (PC, TV...
-
S- 12 Posts - ssm1234Hi I’m upgrading from an ASUS GT-AX11000 Pro. I have two requirements: 1) it needs to allow multiple VLANs or guest WiFi networks and 2) it needs to have adaptive QoS at speeds of 800Mbps with hardware acceleration. Any suggestions? I don’t care about WiFi capabilities much. (I’ve tried...
-
S- 7 Posts - SDF07SI was about to start liking this router until I noticed a major flaw. LAN-to-WAN NAT firewall rules do not apply to any wired VLAN's other than the main one. If you look at IPTables via SSH, you can see in FORWARDING chain that LAN-to-WAN port blocking only affects main br0 bridge. That's a...
-
S- 56 Posts - SDF07SI wanted a replacement to Ubiquity's UniFi Dream Machine (non-Pro), which was a pro-sumer router with support for many customizations, VLAN's, SSH access, VPN's, and allowed use of custom on-boot scripts, but it suffered from some major deal-breaker issues. I ended up with ASUS AX86U Pro, which...
-
M- 15 Posts - margentieri152I recently purchased an RT-BE96U and I'm getting it all set up. I have a lot of smart home devices, and for a long time, I've been meaning to separate them off my main network and put them all on a dedicated IoT network. Upgrading my router seemed like a great time to do this. So, after setting...
-
X- 1 Posts - xTerminatorI'm plan on setting up a new router soon - ASUS RT-BE88U (All-in-one, no external switch) and I plan to use VLANs for better segmentation and security (Since the router supports it). My current plan is as follows: VLAN 2 (10.0.2.0/24): For my NAS. VLAN 3 (10.0.3.0/24): For IoT devices (like a...
-
C- 10 Posts - ChrisAhlundI'm super new to this so I just wondered if I did anything wrong here... I wanted to create a secure IoT VLAN on my AX86U Pro, so I created a IoT network in Guest Network Pro via the Asus APP and disabled "use same subnet as main". I then assigned a port for my IKEA hub to the IoT network with...
-
M- 15 Posts - MercadorHello, I noticed that on my Asus VLAN board, all 4 ports are green and showing 1GBPS but when I hover over two of them, one is 100MBPs and the other is 10MBPS. Is it because of the cable or the other end of the LAN cable? Thanks!
-
- 3 Posts - el_pedr0I'm just starting to think about how to configure my network ip cameras and would welcome suggestions. My current constellation: Gateway/Router: Asus RT AC68U running Merlin Main switch: Netgear ProSafe GS748T V5 Server: X11SM-F with two onboard NICs. Proxmox hypervisor. I have a Netgear Smart...
-
Y- 11 Posts - YRTFS1. Looking for a simple and 100% reliable way to determine if an Asus router supports VLAN management and Guest Network Pro. Is that the case with any and all models that are on the v3.0.0.6.102 codebase, or are there models that lack such functionality? Why not just look at the specs? Well...
-
O- 1 Posts - os62I have an RT-BE88U as an access point. This is connected on trunked VLAN interface (eth9) to the backbone. Also configured are a couple "iot" virtual WLANs on VLANs. My question is: would it be possible, at some point, to have option to configure main WLAN (and management interface) into a...
-
- 6 Posts - VANTHello. Quick question about Asus VLAN implementation. I have RT-AX86u Pro, and three switches (managed) Now my main network have 192.168.17.x addreses, and i need to add vlan. If i add vlan 20 i see this vlan in vlan profile, but main network is not visible. If output port (lan) is configured... -
M- 5 Posts - Michael Levi HillelJust loaded the Merlin FW on the Asus RT-AX86U Pro and lost the Internet connection, while still connected to the ISP on WAN port 1GB. Checked the settings and the menu for 802.1Q VLAN tagging was gone and in order to make it work again, I had to go to LAN\IPTV and set the VID to let VLAN...
-
S- 3 Posts - skizukiI have 2 Internet connected networks, and wants to connect them by VLAN. Since I want laptops in Network 1 prints on the printers in Network 2. Network 1: Netgear RAXE500, WAN connect to another Internet line IP: 192.168.2.1 Devices in this network are printers, Android TVs, etc Network 2...
-
O- 14 Posts - omriHi I have ASUS routers XT8, XT9. Main router is XT9 connected to my ISP router (wan port). I have also cellular router connected to LAN1 which set to be backup connection. I have other nodes which connected to managed switch which connected to LAN2 of the main XT9. My issue is that...
-
- 6 Posts - PhantomskiFirst of all, thanks Merlin for your hard work and amazing news. Even if AX88U Pro doesn't make the cut (though I wish it does), it's still a great thing to have VLANs implemented. At least for me personally it at minimum delays the investment and effort in something like Unifi or pfSense for... -
C- 6 Posts - cc666DO I need to goto FW_GT_AXE16000_90061024856 beta firmware or is there a way to have a seperate VLAN with LOT on current 388.2 Merlin firmware? If its not possible with 388.2 is FW_GT_AXE16000_90061024856 safe as long as I do NOT enable WAN access? Any help is appreciated. Charlie
-
D- 12 Posts - dissonance79I am a total VLAN noob trying to work my way through this. I'm trying to isolate my IP cams from my home network due to security risks I've heard regarding IP cams. My Asus RT-AX88U Pro router is located centrally on the second floor of my house in sort of a hallway loft that is open to the...
-
M- 8 Posts - mmjlmjlI'm evaluation an RT-BE88U with latest firmware. One specific issue I'm facing: I cannot access a device from intranet (VLAN1) on a Guest Network Pro created VLAN. Given this: IP camera on 192.168.3.59 in VLAN3 Guest Network AP isolation on (or off for that matter) IP of the router...
-
M- 2 Posts - MDFDoomI'm looking for some clarity. I have 2 ET12 and 1 AX88U Pro (They are all running the firmware which supports GNP). Currently, one ET12 is the main router and the others are AiMesh nodes. I have an IoT VLAN (52) which works fine and propagates via my managed switches etc. I'm planning on adding...
-
K- 13 Posts - kykaren37Before buying BQ16, I checked the technical specifications page on the official page and the product LAN supports VLAN. https://www.asus.com/networking-iot-servers/whole-home-mesh-wifi-system/zenwifi-wifi-systems/asus-zenwifi-bq16/techspec/ But after I bought it, I couldn’t find the vlan page...
-
R- 1 Posts - RedLineGRHello All, I've been using my DSL-AX82U with my previous ISP and managed to correctly set up both internet and VOIP phone (grandstream WP810) without issues. I recently switched to new ISP that routes internet traffic on VLAN 835 and VOIP traffic on VLAN 837. Now for the life of me I can't...
-
A- 1 Posts - albina19590Hello, I am trying my hardest to understand the „ethswctl“ and „vlanctl“ commands, but I am unable to set a single LAN port to VLAN ID 6, since that's all that I need. The problem is that, the GUI doesn't have that option in this specific model, it's only terminal based VLAN configuration if...
-
S- 4 Posts - shalakFrom what I understand only GT-AX11000 Pro officially supports VLANs on stock firmware. But since my GT-AX11000 has the /proc/net/vlan/config file, I believe the kernel has it enabled (I guess it must have, since in router mode it allows VLAN tagging on WAN port). I'm using my GT-AX11000 as an...
-
Q- 3 Posts - quick.bell2704Hi! I'm working with an Asus RT-AX88U Pro router and an Asus ExpertWiFi EBA63 access point using AiMesh with a wired backhaul. In between, there's a Unifi USW Enterprise switch. The network has a mix of wired and wireless devices, and the wireless devices successfully roam between the RT-AX88U...
-
P- 4 Posts - Planters76Hello all, I’m not sure what the terminology is called but I’m curious if you can do port fowarding on vlan with a Asus RT-AX88U Pro?
-
- 4 Posts - matthew_eliHi, I've been using GT-BE98 for some days with 3006.102.1_1-gnuton0_beta1 in it and I'm in Italy with a 2,5 Gbit fiber connection and my ISP needs VLAN ID 835 to be working (PPPoE connection). If I specify the VLAN ID on IPTV tab setting in WAN section a message pop up, specifying I can only...
-
F- 5 Posts - fulvion75Hello everybody, just signed up but following this forum since a long time now. I'm opening this thread to see if i can get some help finalizing my new home network setup. I introduced a pfSense firewall leveraging the RT-AC86U from routing and firewalling tasks and letting the pfSense take care...
-
M- 15 Posts - MinerI do not get how VLANs are supposed to work with wireless APs in a home network! Background: Have read up on VLANs in a home network. In the interest of experimenting am about to take the plunge. I use a router/FW that fully supports VLANs, opnSense, and shortly will buy an inexpensive managed...
-
J- 7 Posts - jfim88Hello guys, I have an Asus RT-AC68U with Merlin, that is running totally fine after 10 years of 24/7 operation. I live in Spain, and my ISP is Movistar. Asus has a built-in profile to this ISP, Movistar Triple VLAN. This ISP operates with a Triple Play setup. VLAN 6 for internet VLAN 2...
-
P- 25 Posts - paque1960Im a total beginner in terms of vlan set up, the objective for me is to learn how to build in my home network setting first, then once im comfortable do the same at a restaurant. I have attached a drawing of the desired network i am aiming for at home. I understand the basic concepts and have...
-
R- 13 Posts - Richard CookeI was happy with my RT-AC87U using Merlin! Everything seemed to work fine, and the WiFi range was impressive. Then my ISP offered me optical service at 500 up and 500 down for the same price I was paying for VHDSL 50/25! So I jumped at that! They installed a Nokia optical modem. And sent me...
