What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by aex.perez

  1. aex.perez

    Merlin 3004_388.10_alpha1

    Ditto, sort of...
  2. aex.perez

    Release Asuswrt-Merlin 3004.388.9 is now available

    Not familiar with the Gnuton releases, but 388.9 had issues mixed WPA 2&3 and gave me nightmares on have the nodes even with wired backhaul. If 388.9.2 is available best bet it use that release.
  3. aex.perez

    BE-RT92U, ZenWifi Pro ET12, RT-AX88U Pro Aimesh

    Try, under AiMesh on the GUI, select the node you want to turn off it's radio, then on the left select Management, then down to enable radio, then toggle the radio or radio's you want to turn off on the node. At least that's the way it comes up for me and my set up 🤷‍♂️
  4. aex.perez

    Merlin 3004_388.10_alpha1

    Everything working as expected, the Systems Log / Connections page, NICE! Update: The change to DNS Director 👍 Now the streaming box when the Netflix App is loaded and checking the Network through it, only shows the Router only for DNS. Before it showed the Router and 8.8.8.8 (Google IPv4)...
  5. aex.perez

    MerlinAU MerlinAU v1.5.3 - The Ultimate Firmware Auto-Updater (WEBUI + GNUTON SUPPORT!)

    I know, but since I'm not running these devices, or firmware 🤷‍♂️ Figured its worth asking about the operating mode of the devices, redirection when accessing the GUI or something in the firmware/device combo that allowed it 🤷‍♂️
  6. aex.perez

    MerlinAU MerlinAU v1.5.3 - The Ultimate Firmware Auto-Updater (WEBUI + GNUTON SUPPORT!)

    A little curious... I don't have a lot of flexibility to test this and not running 3006.102.5 or those devices either. But curious if the node, second GT-AX6000, is configured to operate as a AP instead of a node, would it still show up in the AiMesh Topology map, but not in either NVRAM...
  7. aex.perez

    MerlinAU MerlinAU v1.5.3 - The Ultimate Firmware Auto-Updater (WEBUI + GNUTON SUPPORT!)

    Option MN from the opening menu, see below What it looks like But from the router, if running MerlinAU on the node the MN opption does not appear on the node, see below At least for me this is the case... Note: From the command line/SSH, not in the GUI...
  8. aex.perez

    Laptop in car

    All that, and depending on the car and it's features and if it's turned on, it can also serve as a WiFi hotspot.
  9. aex.perez

    Both Chrony and NTP at the same time?

    Same thing for me, but after the router meltdown. I redid the update as I reinstalled Entware after a hardware reset. But then installed ntpmerlin from scratch (v3.4.9) over it and the issue went away for me as well, just never took the extra step to remove the ntpd package or look back for the...
  10. aex.perez

    Both Chrony and NTP at the same time?

    Yeah, I did mention it with the Entware update on or about 06/02/2025
  11. aex.perez

    Both Chrony and NTP at the same time?

    Curious if this started happening with the latest Entware update, that’s about the timeframe it did for me, but let it go when the router wiped itself and I had to redo it from scratch. I remember getting NTPD messages in the log about it starting, failing to start or just failing. May have...
  12. aex.perez

    Both Chrony and NTP at the same time?

    Following this, had the same thing happening for a bit. Attributed it to my AX88u meltdown. Then it kept on going as I rebuilt it. Eventually I uninstalled, reinstalled and upgraded to the latest version of the script in the process and reconfigured to use chrony and it sort of solved itself...
  13. aex.perez

    XT8 AImesh without being primary router

    Oh I don't need VLANs, just to make the AX88u and the AX86u's as a mesh for WiFi without a Mesh router, so I can put something else in front of them and eventually look at adding switches and AP's as replacements. A kind of slow roll upgrade/replacement. Whatever I use to replace will have VLAN...
  14. aex.perez

    XT8 AImesh without being primary router

    learn something new everyday 🤷‍♂️ Then to take this to the next step, could I take the my AX88, and two AX86's and make a mesh out of them, as I have now. And them have the freedom to move to a any router independantly, taking the AX88 out of Router Mode and from the function. Maintaining the...
  15. aex.perez

    XT8 AImesh without being primary router

    Almost, they become independent or each other both providing WiFi to devices using unique SSID’s connect to the LAN on the OpenSense firewall - no AiMesh
See more
Back
Top
✖