Recent content by BatKing

How did u generate the key pair? check https://docs.github.com/en/github/authenticating-to-github/generating-a-new-ssh-key-and-adding-it-to-the-ssh-agent depends your local keygen version the parameter you gave, the key pair maybe generated with SHA1 or SHA2 or even other more...

strange, are you sure none of the Ai stuff is on (other than AiMesh) and still no FA after reboot? then maybe its a 800Mhz CPU only bug. I don't have Roaming assistance on in both 384 or 386 firmware. I found most of my iOS devices roam as expected. but none of the Mac Laptop roams after they...

Let me know what you find out on your 1Ghz AC68u. I only have 400 mbps (a recent free upgrade from comcast) and the speed is currently limit to 300 mbps due to my 8 stream down cable modem. even At 400mbps I don't think FA is needed? the 1Gbit Comcast finally available in my home area, but I...

Any one have issue on AC68U (A1) with CTF + FA enabled and Guest1 wifi (both 2.4 and 5Ghz) cannot be connected? Log error as following Feb 1 09:59:31 syslog: wlceventd_proc_event(555): wl1.1: Assoc XX:XX:XX:XX:XX:XX, status: Successful (0), rssi:0 Feb 1 09:59:37 syslog...

Got some time today so try to do more testing by removing my Node and load up the 386.1 Merlin as my test router. I think I may find the issue. repeated test result does verified what I'm seeing is true. If I have both CTF and FA enabled in HW acceleration. then I have this issue. If I only CTF...

not sure if u see my other thread about my failed upgrade to 386.1. I didn't proceed the iptables test as I was thinking to go AiMesh2.0 and YazFi not ready for AiMesh2.0 last I heard. so I used my old scripts. see below thread last post for my working scripts. I am still using basically the...

Thanks, will try that out. Thinking will also try the official 386 as router to see if GN1 have the same issue as Merlin 386. Also I found the router don't have live internet, it doesn't perform stable? and every time I change the router, it take the cable modern more than 20 minutes, sometime...

Nah, all the above steps are manually perform after reset. That's the whole point I used the Node to test as I want to preserve the router in case it is easy config change to fix it and I don't have to reset the router and load my full setup. will try your suggest when I get time and no body in...

That's just saying my verification that my steps of WPS reset works. for a Node setup, after WPS reset, I just leave it as is and use the router to connect to it. When testing by using the Node as a Virgin Router setup, after WPS reset, I have to resetup admin and wifi SSID before it will let me...

I used the WPS button reset method. also everthing was gone after reset. if I go Admin page, I was forced to re-setup everything from Admin user to Wifi before I can do any further setup.

Finally have to go back to 384.19 and all problems are gone. good I have both jffs and config backed up, so only took me 30 minutes back to everything working state. Also not sure why, since I have 2 ac68us as AiMesh, During testing, the one I used for all the testing was the original Node...

Guest network 2 works. I only have GN1 and GN2 setup. I also notice GN1 2.4 and 5Ghz now is on a different bridge on its own, but not sure if this is related. I read somewhere AiMesh2.0 GN1 is on its own subnet. nothing can connect to br1 or br2 APs # brctl show bridge name bridge id...

Same result

Hi, Upgraded 2 AC68Us (aimesh) from 384.19 to 386.1 stable. Initially do a dirty upgrade without reset. Everything seemed fine and AiMesh 2.0 seems working fine. But after testing guest network, Guest1 both 2.4 and 5Ghz can't connect. it will say my password incorrect on Mac or iOS devices and...

seems I concluded too early. after update I am not able to connect to my guest1 wifi both 2.4 and 5Ghz and both give me incorrect password error. Guest2 wifi is fine tho. Mine routers are AC68U but not RT-AX86U or RT-AX88U as Merlin noted. Any one have this issue? Feb 1 09:59:31 syslog...