Recent content by Bionic

I am searching all over the net for info on these units LOL! But no real world reviews are out yet.... The community would really appreciate if you gave an in-depth review on this new system... I private messaged you on DSLReports...

Looking at the Mikrotik hEX RB750Gr3 5-port Ethernet Gigabit Router $56.90 https://www.amazon.com/dp/B01MSUMVUB/?tag=snbforums-20 The performance results are located at https://mikrotik.com/product/RB750Gr3#fndtn-testresults . According to my brief google search regarding "routeros bandwidth...

What Mikrotik router hardware would you recommend that can support a 500 mbps / 20 mbps speed?

What pfsense What pfsense hardware would you recommend that can support a 500 mbps / 20 mbps speed?

I would like to be able to throttle internet bandwidth. This is for business use. I do not want restrictions on bandwidth when sending packet to various intranet devices, but I would like to set various bandwidth policies for the internet traffic. For instance.. I would like to make is so...

+1 I have a RT-AC68U that I just upgraded to Merlin 384.5. My Web History is not working. Shows up exactly how the original poster of this thread showed.

Was running a AC68U on 380.68_2. Upgraded to 380.69_2 over wifi with out a problem. It took roughly 4 minutes from when I clicked "Upload" to when the gui auto refreshed with the new firmware completely installed.

So I think I got it running! Here is the script i put in nat-start #!/bin/sh #Allow Anveo Direct VOIP to come in! logger -s -t "($(basename $0))" $$ Starting.... " $0${*:+ $*}" iptables -t nat -I VSERVER 1 -p udp -m udp -s 50.22.101.14 --dport 5060:5069 -j DNAT --to 192.168.2.10 iptables -t nat...

Yes. I am aware of the post.. I was just letting the original poster know that I also experience the same type of ram usage.

I am also using an RT-AC68U running 378.55 and my ram usage is staying around 85%. 212 MB of 250MB with 38 MB free...

So VSERVER would be the same as using FORWARD? Also why do I need to use a number behind VSERVER? example VSERVER 1, VSERVER 3, etc? What purpose does the number after VSERVER serve? Thanks..

Would you mind providing a link that explains how to use the Forward chain? I found this https://github.com/RMerl/asuswrt-merlin/wiki/Iptables-tips but after following those instructions for that script I still was able to access my PBX from an outside WAN that was not specified in the...

I have tried to get this to work using several scripts but cant seem to figure out the correct way to do this. I first tried this in firewall-start. I dont think it worked. I ran iptables -nL to make sure the entries were applied. I then attempted to register a remote sip phone on an outside...

I think I found what I should enter in IPtables... But I don't know if this should go in the Nat-Start or Firewall-Start? -A INPUT -s 50.22.101.14/32 -p udp -m udp --dport 5060:5069 -j ACCEPT -A INPUT -s 67.212.84.21/32 -p udp -m udp --dport 5060:5069 -j ACCEPT -A INPUT -s 176.9.39.206/32 -p...

Need help w/ Anveo Direct sip provider most secure setup using ASUS AC68U with Latest Merlin FW. Per Anveo Direct, For SIP Signaling I need to allow their IP addresses to reach my IP PBX. Plus I also need to open ALL RTP ports that my IP PBX is using, to be able to receive RTP (Audio Stream)...