Recent content by braebyrn

FYI, for my situation, I am out in the boonies with very little wifi competitors. The distance from router/modem to repeater is about 1000 ft and with no option to hardwire ethernet cable between the two. I repurposed a small satellite dish and have been utilizing this method for about 5 years...

I have been enjoying this ever since the install. It was at the cusp of my knowledge base to even attempt this and many hours of frustrations, but it works great. I am sure someone else will chime in with the answer, but did you switch the choice back to obtain an ip address automatically...

John's fork was the only way I could get it to accept the new flash. However I used the Asus Mini Webserver after I did a reset to get mine to flash John's fork. My IP address through the whole process stayed at 192.168.29.1 to login. I am sitting here using my laptop over 300 feet from the...

The john9527 fork worked great and now I have the repeater function. RT-AC68U_3.0.0.4_374.43_2-14E1j9527.trx is the one that I used to get it to work. THANK YOU for your advice and john9527 for the flash!

Reloaded and verified the CFE version 1.0.2.0 (US)[mega.nz] => DDR3 *unlocked* to 800MHZ this time and flashed the RMerlin firmware (378.56_2) you recommended, however the GUI still shows that I have 3.0.4.376_1703 firmware loaded and there is no repeater button. What am I doing wrong? I have...

If the CFE is not correct, how would I correct it? It shows RT68U when the GUI loads up and also all of the functions work. It also shows the firmware of 3.0.0.4.376_1703. Jsmiddleton4, did you use the 3.0.4.376_1703 before you converted it to RMerlins?

Unable to flash the RMerlin firmware (378.56_2). I have tried the Asus Restoration tool and the Mini Webserver. I followed the directions on the RMerlin notes about reseting to factory defaults and also about others having to wait for over an hour. Any other suggestions before moving on to...

I really appreciate the suggestions. I'll give it a try. Thanks!

The image I posted was taken from the web, and is not what is on my screen. My page doesn't have the repeater button to enable it. I haven't done a factory reset if that is what you are asking? My version of firmware is 3.0.0.4.376_1703.

Any help would be appreciated!

Like this?

Need a nudge to finish this conversion. The TM-AC1900 now shows RT-AC68U and has firmware of 3.0.0.4.376_1703. I have the AMD NAND. All I want to do is turn this into a repeater. Do I flash firmware for ASUS or Merlin, if so, which version so the repeater function to show up on the GUI...

Would I just update the Asus firmware to this below? I see it has the repeater mode. I

Need a nudge to finish this conversion. After educating myself for days, the TM-AC1900 now shows RT-AC68U and has firmware of 3.0.0.4.376_1703. I have the AMD NAND. All I want to do is turn this into a repeater. Do I flash firmware for ASUS or Merlin, if so, which version for the repeater...

I have two new Tmobile CellSpot routers. One is installed at the house in a window facing my shop which is 225 feet away. They are the TM-AC1900 models. I haven't taken the second one out of the box yet and wanted to know how I should use it? I had a wireless N repeater installed on a small...