Menu
What's new
By:
Filters Better Search

Recent content by BritinMA

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. B

    Voxel R9000 - voxel/kamoj - entware -- vnstat

    I was thinking about this very issue while I could not sleep; I have my DNS server on the LAN, so this is not an issue; my router causes minor traffic, so that also is not a concern. However, there are certain devices that loop through the router; for example, my modem, router and plex server...
  2. B

    Voxel R9000 - voxel/kamoj - entware -- vnstat

    @Voxel thanks for your reply; I'll certainly see if the Entware team can help - and THANK YOU for all your efforts, you are appreciated by many! @kamoj under normal circumstances how often do the counters start? I've not played around with your BW counter much, but I could certainly see myself...
  3. B

    Voxel R9000 - voxel/kamoj - entware -- vnstat

    The current versions (since 2.0) use sqlite, but the version in entware right now uses C Struct. There have been 5 fixed/updates since 1.18, and there are other known bugs with these versions, so I am hoping that @Voxel will give some thought into including vnstat2 package. I am also...
  4. B

    Voxel R9000 - voxel/kamoj - entware -- vnstat

    Hi everyone, This is in relation to vnstat which is part of entware. R9000 running Voxel V1.0.4.47HF and Kamoj V5.4b18 Due in part to my ISP starting monthly caps, and my own curiosity, I installed vnstat Jan 1 2021; It works(ed) very well, and within a small amount of gigs, matched what my...
  5. B

    Solved Custom static secondary route on WAN interface

    Worked right away - Perfect - thank you!
  6. B

    Solved Custom static secondary route on WAN interface

    I have comcast; While booting the modem gives the R9000 an IP of 192.168.100.2, and once everything is sync'd, the router gets the 'real' IP. So, as of right now, my R9000's brwan is a real IP address. brwan Link encap:Ethernet HWaddr A0:04:60:**:**:** inet addr:24.**.***.**...
  7. B

    Solved Custom static secondary route on WAN interface

    May I interject and ask what two (?) commands you used; This seems remarkably similar to an "annoyance" I have. MODEM (192.168.100.1) --> R9000 --> LAN (192.168.14.0) LAN can ping 192.168.100.1 but cannot get to web interface. Thanks & sorry if this interjection is against forum rules.
  8. B

    Solved R9000 iptables

    Hello! I am absolutely using Voxel's firmware; It was remiss of me to not state it! I was not aware of the /opt/scripts/firewall-start.sh script - that was most helpful. Thank you! This is the code I've written; It provides a modicum of logic before the command. linedel=$(iptables -L loc2fw...
  9. B

    Solved R9000 iptables

    Hello, I have installed mini_snmpd today, and could only get it to work on the router itself, and not from a local machine on the LAN side; Turns out that in the loc2fw chain, snmp is blocked: iptables -L loc2fw --line-numbers .. .. 3 DROP udp -- anywhere anywhere...
  10. B

    Unable to install ENTWARE - R9000

    Voxel, I always appreciate when you respond - thank you. I did exactly as you said - the other issue I mentioned is that the router is not mounting on reboot - and this is still the same. root@R9000:~$ ls -lash /dev/sd* 0 brw-r--r-- 1 root root 8, 0 Sep 2 11:51 /dev/sda 0...
  11. B

    Unable to install ENTWARE - R9000

    Good day, I have followed instructions, but must be misunderstanding something; I have tried 2 different ways: Method One: USB Drive, formatted ext4, labelled 'optware", extracted entware-cortex-a15-3x-initial-generic to flash drive. ls -lash optware/ total 28K 4.0K drwxr-xr-x 4 steve steve...
  12. B

    R9000 Voxel LED control

    I have my R9000 in the middle of the house; Middle floor, and middle of the house front-to-back and left-to-right. It's ideal. But it's also an area of the house that people walk through at night for the restroom, etc, and the flashing lights are really bright LOL. I like the lights during...
  13. B

    R9000 Voxel LED control

    In fact, you can turn them all off except power in the web interface; This would be acceptable to me; I do not mind the power staying on. Unfortunately at this time, I cannot find what code/script is used when that web switch is used. (Advanced Menu, Advanced Setup, LED Control Settings). If...
  14. B

    R9000 Voxel LED control

    That works perfectly - thank you kamoj!!!! Is there an easy way to put them back to standard - I swapped the 'off' for 'on' and some came on, but it wasn't "normal"
  15. B

    R9000 Voxel LED control

    Hello again I am using Voxel firmware on R9000. I would like to know if it's possible to turn off all or most LED's from SSH session; and if it's possible, how so ?
See more
Top