What's new
By:

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

Recent content by davidlee93

  1. D

    AiMesh issues - unsolved

    Have you tried connecting via ethernet?
  2. D

    Release Asuswrt-Merlin 386.3 is now available

    So in 386.3 I now have to manually enter the ip address of each device in order to not have a dns leak? whereas before on 386.2 I could just set my whole network to go through the vpn with no dns leaks and whitelist a few devices to go to wan.
  3. D

    Release Asuswrt-Merlin 386.3 is now available

    anyone experiencing dns leaks with the new vpn director on 386.3? I am using the exact same vpn config (enabled vpn to start on boot, accept dns set to exclusive, vpn director policy rules, killswitch enabled, added my entire network 192.168.50.1/24 to go through vpn) as on 386.2 with no dns...
  4. D

    5ghz wifi randomly drops on rt-ac86u 384.14_2

    for some reason, only the 5ghz wifi drops but the 2.4ghz wifi and ethernet continue working as normal. router system log: Jan 25 11:31:26 kernel: DUMP CONSOLE: r: seq 0xd2 tid 2 Jan 25 11:31:26 kernel: DUMP CONSOLE: 036617.001 wl1: link up (wl1) Jan 25 11:31:26 kernel: DUMP CONSOLE: 036617.003...
  5. D

    DoT/Diversion/Skynet and Restrictions

    The "RSA-MD5" column should always return servfail, as per the standards.
  6. D

    [Release] Asuswrt-Merlin 384.14 (and 384.13_2) are now available

    Same issue here, my wifi just suddenly keeps dropping (as in no device can connect to the router) despite the wifi leds being on, however my wired connections work normally. Dec 27 19:30:00 wlceventd: WLCEVENTD wlceventd_proc_event(386): eth6: Deauth_ind , status: 0, reason: Deauthenticated...
  7. D

    [Release] Asuswrt-Merlin 384.14 (and 384.13_2) are now available

    Try setting the channel width bandwidth to 40mhz
  8. D

    Merlin/TOR

    Hi, I have a question regarding TOR as implemented in the Asuswrt-Merlin firmware: Does each individual NAT address correspond to a different TOR IP (see image below)? thanks
  9. D

    Data CRC errors - Should I be worried?

    For some reason my RT-AC86U has suddenly began to output these messages in the system log during the past few days. I am not using any scripts, third party programs, etc., nor do I have any usb attached to the router. The only asuswrt merlin feature that I enabled is the TOR settings found under...
  10. D

    Blocking Youtube ads

    Smart Youtube TV
  11. D

    [Beta] Asuswrt-Merlin 384.13 Beta is now available

    Only issue on the 384.13 beta 1 firmware is that my Ecobee3 lite keeps on disconnecting/reconnecting to the router (RT-AC86U) as seen in the system log:
  12. D

    Skynet Skynet - Router Firewall & Security Enhancements

    Because before the kernel panic occurred, the router/skynet was blocking a fairly high amount of IPs (50-100 IPs every two seconds) and it seems that either skynet or the RT-AC86U just isn't designed to handle this flood of blocked IPs.
  13. D

    Skynet Skynet - Router Firewall & Security Enhancements

    I am using a 512mb swap file, Skynet is the only script installed on the usb, not using amtm, was previously on stock asus firmware 45717 and upgraded to 384.12 and did an initialize (which goes to a more clean state than a normal reset, see article) I immediately did an initialize after the...
  14. D

    Skynet Skynet - Router Firewall & Security Enhancements

    @Adamm My RT-AC86U on the lastest 384.12 firmware still randomly reboots with Skynet installed (blocked ru, cn, hk, mo, kp, ir, sg + personalized IP lists): May 5 01:05:05 kernel: _ Reboot message ... _______________________________________________________ May 5 01:05:05 kernel: Kernel panic...
  15. D

    Skynet Skynet - Router Firewall & Security Enhancements

    My router (RT-AC86U) which has DNS privacy enabled in the settings and skynet installed (default lists + ipdeny china) constantly reboots at different times of the day, possibly due to the router not being able to handle a flood of blocked IPs? May 5 01:05:05 kernel: _ Reboot message ...
See more
Back
Top
✖