Recent content by diman82

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D

    Entware [SOLVED] Entware packages not updating - wget doesn't have https support

    Worked for me simply removing wget (by running opkg remove wget).
  2. D

    error while loading shared libraries libssl.so.1.1

    I've got the same issue, AX58U, latest firmware 388.2_2
  3. D

    Tutorial [SOLUTION] Asuswrt-Merlin Tor via Bridge, Device, Browser, Entry (Guard)/Middle (Non-Exit) Relay, and Device/Browser/Relay Hybrid Implementations

    @garycnew ok, first of all - attaching 'torrc.postconf' I've incorrectly run it - I needed to provide a 'torrc' file as an $1 input. Anyway, now I have 2 'torrc' files (/tmp/torrc & /tmp/tor/torrc), both are the same, attaching them as well. Now, I've run 'service restart_tor' command, but I...
  4. D

    Tutorial [SOLUTION] Asuswrt-Merlin Tor via Bridge, Device, Browser, Entry (Guard)/Middle (Non-Exit) Relay, and Device/Browser/Relay Hybrid Implementations

    @garycnew @joe scian When running './torrc.postconf' (file attached) I get: ./torrc.postconf: line 25: can't create : nonexistent directory What seems to be the problem? I want to setup a non-exit relay on my Asus wrt router..
  5. D

    Release Asuswrt-Merlin 386.1 is now available

    I get constant router restarts on my RT-AX56U - had to revert.
  6. D

    amtm AMTM - NTP not ready, check that router time is synced

    @peepsnet I think you need to check your DNS settings (router has no internet access).
  7. D

    Can't access my nas device from wan

    I have a R7000 (with ASUS Merlin firmware installed) configured as a NAS device (and a switch) at IP: 192.168.1.100 and a router at: 192.168.1.1. I can access R7000 admin UI LOCALLY without any problem. WAN access i configured as well, port forwarding on a router is also configured. But, I...
  8. D

    How to allow all outbound and inbound traffic with Tor relay?

    I'm trying to run a Tor Relay node on my router (Asus merlin) with the following configuration: Nickname BugiRelay ContactInfo John Doe <john.doe@example.com> ORPort auto ExitRelay 0 SocksPort 0 ControlSocket 0 BridgeRelay 1 ExitPolicy reject *:* Log notice file /tmp/torlog...
  9. D

    Illegal instruction for every entware app/command on RT-AC86U

    Complete partition format, and reinstall WORKED!!
  10. D

    Illegal instruction for every entware app/command on RT-AC86U

    Interestingly, it has already been selected on 'USB2.0' port. Changed it to USB3.0, but it didn't change a thing.. Tried to run entware-setup.sh and this is the output: => Do you wish to install the 64bit version? (y/n) y Info: Installing the 64bit version. Info: Looking for available...
  11. D

    Illegal instruction for every entware app/command on RT-AC86U

    You mean switch my storage to USB2?
  12. D

    Illegal instruction for every entware app/command on RT-AC86U

    Already did - nothing found and it didn't help.
  13. D

    Illegal instruction for every entware app/command on RT-AC86U

    opkg update/upgrade yields the same error, as fdisk command. diman82@RT-AC86U:/tmp/home/root# opkg update Illegal instruction diman82@RT-AC86U:/tmp/home/root# blkid /dev/sda3: LABEL="downloads" UUID="01D4358BEFA4ACA0" /dev/sda2: LABEL="entware" UUID="a56f2e77-6519-d401-a047-2e776519d401"...
  14. D

    Illegal instruction for every entware app/command on RT-AC86U

    I get 'Illegal instruction' when running any Entware app/command. Trying to run the setup script generates the same error. The problem appeared suddenly, and I'm clueless what can be the cause. Anyone had the same problem before? I'm using the latest Asus Merlin firmware.
  15. D

    [TUTORIAL] Installing Rtorrent on AsusWrt Merlin routers through Entware

    Rutorrent has a lot of problems. It took me a while to set it up. Why not using Transmission client? Works like a charm..
Top