Menu
What's new
By:
Filters Better Search

Recent content by dokape

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D

    Dual WAN Fail Over still using secondary WAN

    The not used WAN is in Cold Standby. If I disconnect in on my DUAL-WAN Setting (remove RJ45), or if I reboot the second modem (cable in my case) the fallback switches to disconnect. I guess there is still a keep/check-alive for the secondary WAN.
  2. D

    Asus RT-AC88U Drops HomeKit Devices WLCEVENTD

    More on my issue: It seems again, the TPLink RE500 Repeater (linked on 5Ghz to the Asus RT-AC88U) does not work properly. Clients connected via the Repeater worked fine some hours and stopped then. No connection to Repeater nor Router. I saw the Systemlog running with these annoying Assoc /...
  3. D

    Asus RT-AC88U Drops HomeKit Devices WLCEVENTD

    Yes i have. But didn‘t check. It ist connected strikt by one wifi and gets always same ip address. (Provided by a raspberry pi DHCP server) Perhaps at your Setup the Google Home Mini changes the Connection to Router and Repeater (Mesh) every some some Minutes? So you would see these log...
  4. D

    Asus RT-AC88U Drops HomeKit Devices WLCEVENTD

    I have the same issue since update to Merlin 384.10_2. I can create the "warning" or "Info" in the log. (loglevel DEBUG, Messages more urgent then ALL) I have an TP-Link repeater. This repeater changes the first 3 bytes of the mac to a repeater mac: My Smartphone has MAC: 64:A2:F9:51:81:12...
  5. D

    RT-AC88U: DHCPRequest via 2.4GHZ Wlan does not work properly (Repeater, DHCP)

    I was searching for a solution of my problem now over one year... Problem: I have a repeater (tried several models, even Asus RP-AC66u, using now a TP-Link RE500): This Repeater was linked with the RT-AC88U on 2.4Ghz Wlan. With Asus-Firmware 380.3341 everything worked fine. Repeater got a...
    • dokape
    • Thread
    • assign dhcprequest ip-address logfile repeater rt-ac88u wifi wlan
    • Replies: 1
    • Forum: Asuswrt-Merlin
  6. D

    RT-AC88U, FW382.1.2: intern clients not always reachable (and more)

    I tried the new Asus-Software: RT-AC88U_3.0.0.4_382_18991-gc0b6a33 (Nov 24.) It seems a DHCP-Lease issue: Connected devices are seeing each other. Here the weather sensor and my android tablet. I switch my android tablet to flight mode (for using a software and suppress loading ads), switch...
  7. D

    DUAL WAN: how to fix new clients to specific WAN?

    I have the same problem as in first post. Using Merlin 382.1.2, WAN ist a VSDL German Telekom with 56 mbit down,30mbit up and LAN 1 is a Unitymedia 20down, 2Mbit up connections. With two external Modems, WAN1 is PPPoE and LAN1 is just DHCP-Connected. I have to assign the clients a specific...
  8. D

    RT-AC88U, FW382.1.2: intern clients not always reachable (and more)

    Interesting: The Route to the devices are not broken from any client: From my Raspberry Pi I can Ping and call the Admin-Sites on HTTP and Port 80 While from my Android Tablet and from my PC (PC connected on same switch on Router) are not able to call or ping the weather sensor nor the webradio...
  9. D

    RT-AC88U, FW382.1.2: intern clients not always reachable (and more)

    It's really annoying not to reach Clients within the own network. :-( To login the Router and do a ping to the adress to get the thing working.
  10. D

    RT-AC88U, FW382.1.2: intern clients not always reachable (and more)

    Router Asus RT-AC88U with FW 382.1.2, Mode: wireless Router (DUAL-WAN) 3 bugs: 1: Internal clients are not always reachable. I have 4 Spotify connect clients: FireTV (LAN), Chromestick (LAN), AVR-Receivevr (LAN) and DAB-Radio (LAN-Connect to WLAN-Bridge), and some other devices like an IoT...
  11. D

    RT-AC88U and TP-Link RE355: no IP-Adress assigned to devices

    My Workaround: Using a RE500 with newer Firmware instead of the Re355. The problem does not appear. DHCP is accepted. It does a fast connect, even clients on Re500 are much faster connected (WLAN-Login) Router: Merlin 382.1.2 RE500: Firmware 1.0.1 Build 20170210 Rel. 59671 Hardware: RE500 v1.0...
  12. D

    RT-AC88U and TP-Link RE355: no IP-Adress assigned to devices

    So the problem is on the Client (TP-Link) side? hmm. worst. The question is, if this problem exists with newer TP-Link-repeaters at all.
  13. D

    RT-AC88U and TP-Link RE355: no IP-Adress assigned to devices

    Still no suggestion what the problem could be?
  14. D

    RT-AC88U and TP-Link RE355: no IP-Adress assigned to devices

    moved back to original ASUS-Firmware 3.0.0.4.380_3341 And - it works again. So there is a problem in the dnsmasq-dhcp implementation between the Asus-Firmware 3.0.0.4.380_3341 and the actual Merlin 380.68_4 also as in the actual ASUS-Firmware. Questions should be: What did Asus? Changed at...
  15. D

    RT-AC88U

    Hi! I'm using the RT-AC88U since more than a year. With DUAL-WAN one on DSL and one on cable. Wifi-Performance is good, I had never trouble with direct connected devices. Well, When to many walls between, it does not work, well. So I use an Repeater TP-Link RE355 to boost the other part of the...
See more
Top