Menu
What's new
By:
Filters Better Search

Recent content by dvohwinkel

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. D

    ai-mesh is not using same control channels

    after removing and re-adding it That looks much closer to what I would expect. Thank you
  2. D

    ai-mesh is not using same control channels

    I have an RT-AX86U as my main router and an RT-AC-86U as my aimesh node. I noticed that on the 2.4 Ghz network they are on the same channel and control channel.. but on the 5Ghz network they show up using two different control channels. Is this normal? The one in Red is the RT-AX86U. I...
  3. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    Is there a way of setting those pwrctl's if I decide to use the RT-AC86U as an ai-mesh node? I guess they really wouldn't be needed.. but I use the ethernet backhaul on aimesh nodes and then sometimes connect stuff to it hardwired.
  4. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    I just wanted to say THANK YOU for all the help and suggestions. I really appreciate it. This has been a crazy 2.5 days of pulling what hair I have left out.
  5. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    Ok now that command is pretty interesting. I turned off "Switch deep green mode" (dgm) and turned off "Ethernet auto power down"(ethapd) and "Energy Efficient Ethernet"( eee) was off like you said it would be in Merlin.. and.. SUCCESS!!! Actually, I'm getting slightly faster uploads than...
  6. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    Yep, it's off. I also have tried with a switch in between and no help.. I really liked the switch idea as I hoped that would clean up whatever it didn't like.. nope.
  7. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    Using Intel PROSet Adapter Configuration Utility and turning off every adapter setting I was able to get 930Mbps down and 300Mbps up. This is an improvement but not the full 930. I'm running out of ideas on what to try.
  8. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    I had a laptop that was giving some crazy speeds on it's ethernet.. like upload was 90Mbit, and upload 930Mbps You are right, I used my old gaming PC and it was able to get 930Mbps up and down. So now it's just figuring out what my RT-AC86U doesn't like about my ASUS X570 Aura's Intel I211...
  9. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    No, no jumbo packets.
  10. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    Yep tried forcing all these, same issue.
  11. D

    What happens with two different ASUS routers in ai-mesh?

    I think my RT-AC86U is toast.. so I need a new router. My house is around 2400sq so I have used ai-mesh with a RT-AC68U as the aimesh node. I wonder what router to get that gives me the best range, speed, and processing power. I have a 1Gbps Fiber connection. My question is what happens if...
  12. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    I loaded the ASUS official firmware(latest from website), hard reset to defaults, soft reset to defaults, formated jffs, then with the power off to the ONT(I pulled it's plug for 8 hours) I connected the 86U to the ONT port and rebooted 86U.. then waited 5 minutes and powered on the ONT.. same...
  13. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    I've done all these things.
  14. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    I have not.. How long should I cycle it for?
  15. D

    Just got fiber but can't get upload speed above 60 Mbps on RT-AC86U with 386.3_2

    but why would the 86U be consistently the issue? Anytime I am going tru that it is slow. Direct connect is fine and going thru the 68U is fine.
See more
Top