Recent content by fisherman10

Same problem here. Also I am unable to search for AIMESH nodes. I can press search but it will not find anything. Worked fine on stock firmware but not on 386.5.

The user manual says you can have 1 main PLA and more node PLAs.

Update to latest and then do a system reset. Still same problem? Screenshot your settings for 2.4g.

Intel website is funny. Click drivers from their main Intel AX200 page shows up to 22.50.1 only. Anyway, it shouldn't be having problems detecting WPA2 only. Something somewhere is not right.

Maybe try completely uninstalling the AX200 drivers, removing the device from device manager. Then reinstall with the setup file directly from Intel's website. Latest should be 22.50.1 6/1/2021

Set channel bandwidth to 160mhz. Set Channel to 36. Press Apply. LAN devices should connect to the Asus.

You should enable 160mhz. Intel AX200 supports 160mhz. You're cutting your speeds in half by disabling 160mhz.

Just to update the thread, I left SmartConnect disabled. Separate SSID for 2.4ghz and 5ghz. Left the SSID with the ! exclamation mark symbol. Encryption still left at WPA2 Personal. Just selected 160mhz only instead of 20/40/80/160 and also selected channel 36. But for some reason the channel...

Thank you, I will test it out later today

If I change the channel bandwidth to 160mhz, will my other non 160mhz 5G devices be able to connect? It seems very inconsistent. Earlier I tried to tick Auto for DFS channels and it reenabled 160mhz automatically. Sometimes just toggling some options back and forth or rebooting will "force"...

Hi all, I've been having difficulties connecting through 160mhz on my AX86U. On some situations like after a reboot, it will connect to 160mhz after a while. After some time, in the wireless log, the router will switch back to 36/80 and it won't switch back to 36/160. DFS is clear here. Wireless...

The reason I'm telling to try out Asus stock firmware first is to rule out any potential hardware or configuration faults. Because I see many replies here talking about trying out configuration and WiFi settings in the web portal. By trying stock firmware and/or default settings, we can at least...

Your testing shows that AiMesh works on stock firmware on both router and node. That's what I meant by "flash back to Asus stock firmware".

Phone specs plays a role too. We need to know whether your phone has 1x1 or 2x2 streams. Just leave the Channel Bandwidth on the default 20/40/80/160.

Both AC66U_B1 and AC68 are configured the same. Both as media bridge. On a good day, I get almost close to 500mbps down. Normally with interference, I get 300++ down. 100mbps UP is my ISP limit. I mentioned earlier that my line is 500mbps down / 100mbps up. In media bridge mode, there's no...