Recent content by halcy0n9001

This is pretty much what I did too, minus narrowing the bandwith. I guess I'll just have to repeat on newer FW. That's fine.

Is this a 2.4g device, and did it connect OK on previous firmware? I'm deciding if I should upgrade from 3004.388.8_2 which has been very stable, but is now quite old.

Haha yep, thanks.

Jumping on this thread rather than starting my own to ask a similar question. I'm on 3004.388.8_2 and everything (guest network, access blocking, VPNs etc) working perfectly apart from the WAN port falling back to 100mbs which I've fixed with a cron job script. The only thing with not...

Thanks, the device doesn't have a manually assigned IP. But is on the guest network, perhaps that's why the scheduling doesn't work. I've just blocked the device for now.

AX-86U Pro running 388.2.2 I have set-up time scheduling for a device but it still has internet access outside the configured hours. The time scheduling is set to Time in the ParentalControl.asp view, the hours are configured, enabled and applied. If I use Block the device cannot access the...

AFAIK a keypair can only be used on a 1 concurrent connection. e.g. if you import the Dallas key pair into 2 connections it will only work on 1st connection, then 2nd and subsequent connections will connect but there will be no internet. If you want to use the Dallas server twice, you need to...

I'm guessing you imported the wireguard config file from your VPN provider. If it was typed manually maybe there is a typo in the config?

Thanks for the support, appreciate it 🙏

For me everything else goes out on non-VPN. Rules are executed from the top to bottom, once a rule is matched no further rules are processed. So you just need to setup your WG clients as @RMerlin suggests.

Seems like skynet is the culprit, perhaps the amtm script could detect if it is installed and ask the user to disable before installing adguard. Thanks for the tip.

Router shell defintely has internet access. ping 1.1.1.1 -c1 -W2 PING 1.1.1.1 (1.1.1.1): 56 data bytes 64 bytes from 1.1.1.1: seq=0 ttl=59 time=8.809 ms --- 1.1.1.1 ping statistics --- 1 packets transmitted, 1 packets received, 0% packet loss round-trip min/avg/max = 8.809/8.809/8.809 ms...

I have this setup working, this is how I did it. 1. Set static IP addresses for the devices on your LAN that you want to route via the VPN (LAN -> DNS Server -> Manual assignment) 2. Add those static IP addresses to the DNS director rules local IP 3. Reboot the router so those devices get the...

Hello, when I try to install via amtm I always see an error *** Error: Unable to detect the Internet! Any clues as to that I might need to change for this to work? Thanks! Info: Detected RT-AX86U_Pro router. Info: Detected Linux platform. Info: Detected ARMv8 architecture. Info: JFFS...

Thanks for the great software :)