Recent content by henrikk

Thank you Merlin.

I have running Merlin 378_55. I disable STP in the switch control page. This appears to set the nvram 'lan_stp=0'. I note, however, that even with STP disabled in the GUI nvram 'lan1_stp=1'. What does lan1_stp control? - Henrik

Thank you Merlin. I am aware of this. My post was not about getting the same performance as a PC, but rather me noticing the issue with things slowing down when HW acceleration is on and the faster performance with TCP over UDP. Both of these seemed strange to me. I am not trying to match the...

I am seeing some strange behavior using OpenVPN client and 378.55 on a AC68. I have client configured on the AC68 to connect to the OpenVPN server. Works great, except my throughput of about 27Mbps seemed a little low. When I direct connection to the OpenVPN from my PC my throughput is >...

I have policy routing set up where only one client IP goes through the VPN tunnel. It works well. The problem I am having is with DNS. When I set the DNS to "exclusive" it works just as advertised and I have no DNS leak for the client, *but* at this point all my clients start using the DNS of...

Thank you to all who responded. Formatting the flash drive as ext2 solved the issue. iftop and other programs now survive reboot. Regards, - Henrik

Are you using a RT-AC68U (or R) device with 3.0.0.4.374.39 firmware? iftop worked just fine for me on my previous ASUS router. If yes, I am confused why it is not working for me.

Here is some more info including mount output. Initial installation: admin@asus:/tmp/home/root# mount rootfs on / type rootfs (rw) /dev/root on / type squashfs (ro,relatime) devtmpfs on /dev type devtmpfs (rw,relatime,size=127720k,nr_inodes=31930,mode=755) proc on /proc type proc...

I am running 3.0.0.4.374.39 on a RT-AC68. I install optware by installing "Download Master" and then disabling it. When I ssh into the router ipgk appears to work and I can install software. When I install 'iftop' (eg. "ipkg install iftop") the packages including the needed libpcap library...

Thanks Merlin. That explains it. - Henrik

Merlin, I have this working now. Thanks. Please help me understand the first rule in iptables on the INPUT chain when enabling openvpn: ACCEPT all -- anywhere anywhere ACCEPT udp -- anywhere anywhere udp dpt:1194 The second...

Thanks... Merlin. I should have no problems doing this. - Henrik

I am trying to configure sshl from entware on my RT-N66U (Merlin) (I want to multiplex SSH and OpenVPN). I have it working on my internal LAN just fine. External (WAN) it is not working. Seems like it is a port forwarding issue. So, I am trying to forward port 443 to the router and I add the...

Has anyone used the Juniper SRX series of gateways to their home or small business routing needs? I can find little on these units on this site and in these forums so I ask. I am looking at a SRX220 as a router for a small business. The unit might be paired with a Juniper EX2200 switch. Any...

I need to limit the bandwidth off *all* outgoing traffic from all internal source IP's (or selected IP's or IP ranges) to a certain cumulative maximum. It is not clear to me how to do this or even it can be done. I can see that I restrict by service/port, but I am not sure how to restrict all...