Recent content by housej55

Hello RMerlin, Congrats on the great write up on smallnetbuilder! I'm thinking of going with your build again, but is there any way to limit a client's bandwidth speed on your build? I know there are qos settings but would like to be able to cut a couple static clients down to 1mb if needed...

Boo .. unfortunately my firmware (Shibby AIO 104) doesn't support the led_ctrl command, shows not found. I did have yours in but couldn't find a "Bandwidth Limitation" setting like what I see in Tomato :(

Yeah, I tried this last night with my NT66u and it didn't seem to have an affect. Going to put the default values back in.

Hello RMerlin, thanks so much for this info on the N66U, So is each and every led light a different number? led_ctrl 0, 1, 2, 3 etc?? If so, is there any thread you can provide, or info on which numbers match which lights? I would like to have one script that would turn all led's off at say...

Did just see this old post and see the output mentioned within. thanks http://forums.smallnetbuilder.com/showthread.php?t=6937&highlight=lights "POST" The only place I could find is the nvram settings on led admin@RT-N66U:/tmp/home/root# nvram show | grep ledbh size: 28929 bytes...

Didn't know if anyone had looked in to this, but is there any way to set the lights on the N66U to stealth mode like what you can do with Merlin's firmware on Shibby firm? Thanks, housej55

This is a good find sfx, was this unit running the stock Asus firmware?

I'm going to have to check this out as I'm running Shibby's firmware and having the same problem when running the wireless but I don't account for everyone running this firmware. Will check with others running Shibby's and see if they say it is working just fine. I was under the impression this...

Thanks for the update, could be my inline power adapters however my sling box unit shows no lag at all connected to them. Will have to measure further I guess.

No, I'm having the same problem as everyone else with wireless, I was basically stating in "addition to" , my Lan connection is not any better it seems. I haven't seen much feedback on whether everyone's LAN connection is working just fine..

Jeremy, I have even went as far as connecting my Xbox 360 slim to a set of power line adapters using the LAN port and its still really slow. I have a Slingbox using that same power line connection for a test now and it is much faster. Looks like I will need to try a Wireless bridge with the xbox...

I had no issues getting my Guest Wireless network working with the .104 build of Shibby, but did you guys have any luck in getting the bandwidth restriction working for a "Client" in your Guest network? You can limit the bandwidth of the whole network, but I cannot specify a user in the...

Is bandwidth limitation only available on the primary Lan0 network?

Hello, I am running Shibby's build tomato-K26USB-1.28.RT-N5x-MIPSR2-104-AIO-64K.trx on my RT-N66U. All is working well except I ran in to a issue with Bandwidth restriction only working on the br0 bridge or "Lan" Network. I had a br0 - eth1 10.10.1.1 with scope of 10.10.10.100-200...