Recent content by joloxx9

Thanks I just forwarded the port manually and all seems to work fine.

I am having issues with my Plex server, there is an upnp on it that should open the port, but randomly after the server restart I see below in the log: miniupnpd[4797]: Failed to add NAT-PMP 14682 tcp->192.168.50.158:32400 'NAT-PMP 14682 tcp' There are no other issues etc. the best solution...

I will have a look as iphone is not my daily phone :) EEE is arleady disabled unfortunately: Joloxx9@RT-BE88U-DAA0:/tmp/home/root# ethtool --show-eee eth6 EEE Settings for eth6: EEE status: disabled Tx LPI: disabled Supported EEE link modes: Not reported...

My appletv 4k gen 3 is hardwired to the BE-88U running merlin, however when appletv is in the standby mode it does weird things: https://pastebin.com/ERnCky9x It does constantly change between 100Mbps and 1Gbit. Is there anything I can do on asus side to prevent it from that, or it is just...

Mhm in my case even reset button is not working Ok after 15 min of reset attempts I finally wwas able to reset via reset button, it is working now, I would sugghest everyone to reset to defaults before flashing merlin.

Did you have VPN settings or anything on it prior flashing this firmware? As I cannot connect with GUI now and I am afraid device is broken...

I've been using 99% web gui, app got no access aswell, I have tried http but no luck, however what port should I use? I've got AX86 running as mesh node, it is working and when I was trying to log into it by going through node IP it said that I cannot be connected asI can't connect to the main...

I have updated BE88U to beta and cannot acces router, got internet etc, just GUI is not working, no matter if I use IP or http://www.asusrouter.com/ any clues? I have tried restart and no luck, it is quite problematic now. Any help would be appreciated! Openvpn not working either, is there...

Iperf3, steam, windows, torrent, browser(wpeedtest virgin speed tests etc) wven the one builded into router however I know it is not reliable. I think it was clear Superhub(virgin modem)1Gb(or 2.5Gb) AX86U-2.5Gb PC i could swap 2.5Gb in AX into 1Gb and speed was same - "low" Now I have...

Okay then, everything was wrong somehow and you are right. Sure, especially when my NAS-PC transfer is now 260MB instead of 110MB, and I am the person who use it a lot, easy to judge when you do not know background.

And this is correct, I am hitting constant 1100+ on current setup

Chrome(downloading from Google Drive), Speedtest, virgin media speed test, google speed test, Qbittorent - some enormous linux files, Steam, Epic games store. Each of them was going up to 1120Mbps / 136MBps on 1Gb port on the new router, on the old one I was hitting mostly 800-900 speed, with...

I am a new user of this router and so far so good, however looks like firmware is not the best, I had to restart it twice during config as wifi went completely down when I was setting additional network for IoT. Anyway, got a question which bothers me a bit. At the moment I utilize standard...

There was a problem, so my modem got 1Gb and 2.5Gb ports. When I plugged PC directly to 1Gb speeds were around 1120, exactly same as when it was plugged into 2.5Gb. Moreover, previous modem had only 1Gb and was capable of going 1100+. Anyway, looks like AX86U is not as good as I thought, as I...

I think I have tried all, 1GbE to 2.5GbE, 2.5GbE to 2.5GbE, 1GbE to 1 GbE and 2.5GbE to 1GbE and can't see any difference.