Recent content by Kanashii

Used first method, entware + ifenslave. LAN -> NAS (OK) but WAN to NAS (KO). No traffic from WAN to LACP ports... Last LinkAgg script dont work with old Merlin's firmware (3.0.0.4.270.26b) but I don¡t want to upgrade 'cause makes my 5G slug. P.D: Ok, not really sure what happened but let me...

Did you recently turned on the UPnP?

Let's reserve one more.

Another post reserved, hopefully the last one.

Reserved for futures posts

4 pin to 12 pin molex To complete the 4 pin to 12 pin I need to make my own molex cable. If you don't want to buy the 12 pin Mini fit jr molex enclosure you can unmount the one from the original PSU (only the enclosure, not the wires or pins). That make you save some money or order it from a...

Testing the new created 4 pin to 8 pin adapter... It's alive!!! Now I must continue with the 4 pin to 12 pin molex adapter... the hard one!

Making the wires... What do you need? - 16/18 AWG stranded wire - Molex male/female pins for Mini-Fit Jr (we're going to split 3 wires to 12 so get bigger pins than wires to mix). - Wire cutter - Molex pin extractor - Molex Mini-Fit Jr crimper Optional - heat shrink - wire sleeves - soldering...

WARNING: I'm noob on this and doing it on my own so be careful and DIY at your own risk! Or better wait while I try to complete the adapters before you burn your NAS... Hello, after some years of hard duty my Synology make some irritating noise. As you can find in Synology's forums is caused by...

I know it has been some time ago but can you explain how you converted a normal PSU (SS-250SU APFC) to Synology connectors? I bought a fanless PSU and I have to addapt now the psu to the synology type. P.D: No response so far so I started my own project