Recent content by knubbze

Just tried that; unfortunately, no change. Any other suggestions? I also just upgraded to 380.60 beta 2 to see if that wiuld fix it, but again, no good.

I power cycled my AC68P running merlin 380.58 earlier, and upon reboot, discovered that the two drives connected to it (one 2TB 2.5 external HDD and one 16GB flash drive, both USB 3.0) were no longer being found. The web GUI says "No Device" for either of the ports, and neither of them are...

Has anyone else had problems with SMB shares with this release? I upgraded from .57 to .59 and now am unable to access my SMB share from my Windows 7 boxes: Strangely, I can still access the share fine from my Android devices. If I flash .57 back, the problem disappears. I have not changed...

Well, as I stated in the first post - this HDD is connected to the USB 2.0 port, not the 3.0 port. I do also have a USB 3.0 flash drive connected to the USB 3.0 port, but the problem didn't happen with this drive/port. Sent from my Nokia 3310 using Tapatalk

Well, I'm glad to report that I have rebooted the router 3 times this evening, and each time the drives were mounted correctly. I wanted to be extra-sure, so I enabled 'Reduce USB 3 interference', waited for the router to reboot (it appears that toggling this setting triggers a reboot), and...

I will reboot the router a few times this evening and will report back. *fingers crossed* Sent from my Nokia 3310 using Tapatalk

I just checked the setting, and 'Reduce USB 3 interference' was enabled, so I disabled it as you suggested and rebooted, and guess what - both drives now mounted properly! I will reboot another few times over the weekend to make sure that this setting resolves the issue, but thanks so much for...

Incorrect - I edited the post because I had wondered if that was the issue, so I reformatted the drive to ext4 and the same thing keeps happening. I am still looking for help to fix this.

Hmm, further to the above, this post at the start of this thread mentions installing and running hubicfuse, but it doesn't seem to be available in the Entware-arm repo...

zyxmon, could I please request that 'hubicfuse' is added to the Entware-arm repo? It's available for MIPS Entware. Many thanks, knubbze

That seems to be a slightly different issue than mine, and I've had this problem with every version of Merlin's FW.

Nope.

No, as I said above, the disk label isn't the issue here. I appreciate you trying to help, but perhaps someone else might have more insight into this problem. Sent from my Nokia 3310 using Tapatalk

The problematic drive is NTFS. Sent from my Nokia 3310 using Tapatalk

Again, that's not the issue. The other drive also has a number as the first character of the disk label and doesn't have this problem. Sent from my Nokia 3310 using Tapatalk