Recent content by lorkadiscovery

Thank you very much!

I have a RT86U as main router and a AC88U as a Ai Mesh Node. I installed this firmware on my 86U last night and went to enable Ethernet Backhaul but it gave an error that the 88U was not compatible. After checking on the Asus Download Center, the last firmware for the 88U was Version...

Could you maybe setup a guest network with the same SSID as the main network but then use the Wireless MAC Filter on the WiFi tab to set all the allowed devices to the main network? Not sure if it would work but that may force all rejected MACs to connect to the guest SSID?

Hahaha. No worries. Does Flex end up starting tho? In other words is there nothing to worry about?

Thank you. I dont have any complex setup, its a straight WAN connection to my Virgin Media router in modem mode. Not sure why the WAN interface is having issues as I assume there are many people using the same setup as me in the UK. Could it be a faulty 86U or just an issue with Virgin?

@dave14305 Just left putty and tried again now I get filter protocol all pref 1 u32 filter protocol all pref 1 u32 fh 800: ht divisor 1 filter protocol all pref 1 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:2 mark 0x0000 0xc0000000 (success 930) filter protocol all pref 3 u32 filter...

Ok its back. Sep 30 23:36:34 RT-AC86U FlexQoS: Applying AppDB rules and TC rates Sep 30 23:36:34 RT-AC86U FlexQoS: RTNETLINK answers: Invalid argument Sep 30 23:36:34 RT-AC86U FlexQoS: We have an error talking to the kernel Sep 30 23:36:34 RT-AC86U FlexQoS: Command failed...

I am not sure if you still want the print out as after a few restarts its stopped now. I am still getting some generic QoS errors but I am unsure if they are related of anything to worry about. May 5 06:05:34 A.QoS: qos_count=0, qos_check=0 May 5 06:05:34 A.QoS: set_qos_on fails May 5...

@dave14305 Thanks for the reply The output is filter add dev br0 protocol all prio 10 u32 match mark 0x803fffff 0xc03fffff flo wid 1:14 filter add dev eth0 protocol all prio 10 u32...

Hello. I have installed FlexQoS on my RT-AC86U today and on a reboot my log is filled with the following. Any ideas please? ep 30 18:20:19 RT-AC86U A.QoS: restart A.QoS because set_qos_conf / set_qos_on / setup rule fail Sep 30 18:20:20 RT-AC86U A.QoS: qos_count=2, qos_check=1 Sep 30 18:20:23...

Update: This issue was because I had an AI Mesh node that was setup on the main mesh router with a static IP. After removing the DHCP static setting and removing/adding the node the error has now gone. Thanks all

What are you using as the DoT servers? I had the same issue using Quad9 as the DoT servers but now using google for the DNS servers and cloudflare as DoT I dont get the issue anymore.

UPDATE: This issue is not related to Diversion and can be ignored. @Treadler it is indeed related to AI Mesh. Thank you so much. ------------------------------------------------------------------------------ Hello, I'm going to post this in here as the issue I'm having here...

Can you please post the settings you are using. Are you using seperate SSIDs or Smart Connect? Do you have a screen of each wifi bands settings. Can you post the Professional settings for wireless also please.

Futher to last night the log this morning shows the error in a block to do with DNSMasq and Diversion. Sep 30 01:42:30 RT-AC86U spdMerlin: Speedtest results - Download: 361.54 Mbps (data used: 382.8 MB) - Upload: 36.82 Mbps (data used: 35.8 MB) Sep 30 02:00:01 RT-AC86U kernel: echo (13640)...