Recent content by Moan
-
Problems with GT-AX6000 after the factory reset: transmit queue 0 timed out
Yeah, I was factory resetting with many possible firmwares and settings initialization checked. I returned to the old router and not a single issue for over 1 month now. That Asus router got the deserved refund. I learnt not to try improve things (router change) that are working fine. -
Problems with GT-AX6000 after the factory reset: transmit queue 0 timed out
That's strange. For me it didn't take that long to establish connection with the Switch / PC. Maybe it's actually flooding some weird packets? Either way I was unable to fix it. Returned to the old router now, and all problems are gone. I think Asus became not so great after years. -
Problems with GT-AX6000 after the factory reset: transmit queue 0 timed out
Hi guys. Here's another strange problem that I started experiencing with my new Asus router. 1. After I unboxed it, I updated to the official firmware GT-AX6000_3.0.0.6_102. 2. On the same day, I flashed Merlin: 388.2_2. Everything worked fine for a few days (except some little bug with my... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
Are you guys ready for a cherry on a cake? The reason of all these problems is: Realtek's Windows 11 Driver! I started Windows 8.1 on My PC, to realize that the problem is not occurring there. After I switched back to Windows 11, I installed the Windows 8 driver from... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
OK... So it's a bit different than what I thought. On the Router when I was performing Iperf from the New NAS it was always maxing at ~2.35Gb/s, even with -P 1. So even after the switch reboot, speed wasn't reduced between them. I connected the Switch with the router, using the 1Gb/s port... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
When the problem was happening (after the switch reboot). Without the problem I'm always getting full 2.5Gb/s in the Task Manager (NAS + Router's Iperf). I updated my previous post with some extra information. I should also check what happens if I connect the Router to the Switch with the... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
Thank you for the idea! I was so focused on getting the 2.5Gb speeds that I forgot to verify other things. So I connected the Switch to the Original (1Gb/s) Ethernet port in the Odroid device. The 2.5Gb was unplugged. I set a different IP address for that adapter (192.168.1.136 instead of... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
No, my Internet upload speed is only 100Mb/s, so that would be way slower. It just goes to the Asus router and then back to the PC as a local connection transfer. That NAS is unreachable from Internet anyway. Sorry, that screenshot was misleading and had result of a different test performed... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
Power saving is disabled, the MAC address doesn't change. What I noticed on this switch is that after power on, the network (on PC) appears for 1-2 seconds, then disappears and appears again after 2 seconds. It's like this switch is reconnecting devices twice after reboot? Or maybe it's when my... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
All right, but how? It's easy to blame some device, but the entire problem makes no sense. This adapter is not attached to the router. The switch / the router should know exactly where the traffic is coming from/to. Even if it was a 40 years old Ethernet port in some antic PC, the switch and the... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
Yes, all screenshots are when the problem is occurring. When I run iperf3 from the router to PC, I only get 1.8Gb/s max. I suppose iperf is not working so well on the Asus itself? Is anyone actually getting the full 2.5Gb/s from the router with iperf only? Exactly. It makes no sense. I... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
Unfortunately, I'm unable to install iperf3 on the old NAS. I enabled the iperf3 daemon on the Asus router itself. It was giving me max. 1Gb/s, but I then noticed that QOS was accidentally running. After disabling QOS I am getting max. 1.7Gb/s from the router with iperf. Iperf obviously gives a... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
I'm assuming it based on the reduced speed from the old NAS and the Internet speed (speedtest reaches very low values then). For me it looks like the Asus router's 2.5G LAN port is accepting the transfer from the New NAS, and then sending to My PC using the same port. This causes that this port... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
There's really nothing special: Theoretically, My PC should get transfer directly from the New NAS. Unfortunately, for some reasons it goes by the GT-AX6000 router until I unbing/bind ethernet adapter and it fixes itself in like 1 time per 4 attempts of binding/unbinding. Disconnecting the... -
A very strange problem with GT-AX6000 and QNAP QSW-1105-5T switch
The switch is only connected with 1 eth (2.5Gb) port of the router. What diagram exactly should I give? The list of what devices are connected to which port, as in my first post? The bad news is, my "workaround" script stopped working, or rather works randomly when I'm testing it. It's a very...
