Recent content by morecrap

Hey people, I have been using TomatoUSB by Shibby on my RT-N16 for quite some time now and found that if I ever needed to reconnect the PPPoE connection (same result on AsusWRT, stock and Merlin's builds), it took at least 20-60 seconds to get the connection back on BUT when I do the same thing...

RT-N16_3.0.0.4_376.45_0 Merlin's build works perfectly with my Huawei E352 3G stick

Ok guys.. I finally did it! The disabling jffs idea gave me a clue. First off, I restored to a stock build. Then: Now installed John's updated build. And that was it. Everything works like it should! John, I'm now using your Merlin fork and it works perfect with my Huawei E352 (I chose...

Did this without any USB devices attached as well. Not using jffs. It seems the router has committed itself to dd-wrt K3X and refuses to work on any other firmware.. :/

Yeah.. I did that.. Only instead of 10, I did a 30-30-30.. This is what I did: 1. On dd-wrt, performed a 30-30-30 reset with the WPS button. 2. Put the router in recovery to flash Asuswrt and flashed it, and it fails every time! 3. Restored back to dd-wrt, and performed a 30-30-30 again. 4...

Hi guys, I tried the nvram erase thing. It didn't work. Still no wifi/ internet sharing (though the router is dialing the 3G connection and pings an external IP when i SSH into it) on Asuswrt. Flashed DD-WRT again. Please help!

My issue is that the wireless has also stopped working under stock or Merlin's builds..

Should I also clear the cfe_nvram partition? I have reverted to DD-WRT K3X for now and /proc/mtd reads the following:

Pls help!!

[Solved] Going from DD-WRT K3X -> Asuswrt-Merlin Hi guys, I wanted to try out the new Asuswrt Merlin build for my RT-N16 and ran into a rough patch. I have been running DD-WRT since a very long time. Specifically K3X builds. Now, when I restored to the Merlin build, it asked me to...