Recent content by Mr.H

384.19 Actually seems like it updated itself currectly as I see this: xxxx@RT-AC68U:/tmp/home/root# cat /opt/etc/opkg.conf src/gz entware http://bin.entware.net/armv7sf-k2.6 .... So, should be good.

Yes, that was the root cause. I executed single command from https://github.com/Entware/Entware-ng/wiki/Upgrade-from-Entware-arm and it worked like a charm! Thank you.

So, I decided to do opkg update and.. it was stuck, via htop I realized that it stuck on wget ... http://qnapware.zyxmon.org/binaries-armv7/Packages.gz I gave it a try in console and after several retries Connecting to qnapware.zyxmon.org|158.160.45.54|:80 what I got is - error 4. Then I put the...

Hey, for anybody whom it might help in the future. I managed to track down this issue to TLS version mismatch issue on my RT-AC68U, 384.19. So, when turning debug/all logging on the router, I saw log like below (see log at the bottom of the message). When I used tcpdump to sniff on br0 - saw...

I did it. Not sure if it is right way, but I modified next file (change appropriate line to CONFIG_USB_SERIAL_FTDI_SIO=m): asuswrt-merlin/release/src-rt-6.x.4708/linux/linux-2.6.36/config_base.6a Seems like it is not enough to compile and load ftdi_sio.ko now as busybox did not include stty by...

Custom kernel settings Guys, want to ask your help. I managed to build custom firmware for my AC68U, everything is ok, but I stuck with ftdi_sio module. Where should I enable it? I tried to do so in kernel options (make menuconfig in linux-2.6.36 folder), but it doesn't work. Seems like I...