Recent content by multicast

Well the thing is when I had it configured as a router I was able to create a VLAN using the build-in option in the GUI, so then I just removed the VLAN interface from the br0 and assigned it an completely different subnet and was able to see the router in that interface without looping or...

@R. Gerrits unfortunately swconfif isn't a command in my X10 running VOXEL's FW, file enet.sh exists but I only see ssd_sh being used for all the configuration, are you familiar with that command? Thanks in advance!

@R. Gerrits thank you so much for the info, I'll try it and let you know if works. I'm not using my X10 as a router but as an AP with my 10TB HDD attached to it, I currently have port 1 connected to a VLAN witch is connected to my EDGEROUTER, my idea is to create a separate port in a different...

Hi All, I'm trying to identify which ports in the back of the R9000 are eth1 and eth2 respectively, I know all are in the same switch but I want to break apart the switch and use those eth1 and eth2 independently, each has its own MAC address. Any ideas where do I need to look into the Voxel's...

@Voxel Thanks for another great update, I did switch my router/NAT functions to Edgerouter and I've noticed my throughput increased dramatically, all my Gigabit Ethernet devices are reporting around ~920mbps when I test the internet speed with speedtest, something didn't happen with my R9000...

Thank you @Voxel very much appreciated.

@Voxel Thank you so much for taking the time in providing an updated version, always VERY appreciated.

@VinnyJ it seems you have same issue I had, just disable the Traffic Meter and you good.

Thank you @kamoj

@Voxel and @kamoj, does anyone of you know what is the script/file used to build/load the firewall rules in IPTABLES when a change is done in the configuration? I have some own rules that are overwritten every time so I would like to add them as part of the standard firewall rules. Thanks in...

Thanks again @kamoj, and yes I'm very pleased with all the help I've found here. I will take a look at dmesg when I see this whole thing is stable :) don't want to introduce more noise until then :p

@kamoj thanks for this incredible info, if I understood correctly UBIFS should be able to "autocorrect" the issue moving the data out of the bad block to a good one and mark down the bad block, thing is I was still seeing ECC errors in the logs, like UBIFS wasn't doing it. After checking with...

What is UBI? I do see 1 bad block out of 37 allowed, I flashed the stock FW when it died using TFTP then flashed Voxel's but never had to format the flash.

@Voxel and @kamoj I've found this in dmesg, do you have any idea what these errors could mean?

@kamoj I just executed all the commands and found out logs are being saved at /mnt/sda1 but the weird thing is my disks are not mounted as sda1, when I execute fdisk I get this. It seems sda1 is my Flashdrive (which is labeled optware) but not idea why is not mounted sda1, not even my HDD...