Recent content by Oricus

Airtime fairness is disabled. (I have never turned it on) I am running stock settings so not sure what is going on. I am trying to avoid another factory reset (it's a pain pairing the zenwifi's sometimes).

I have a strange issue since upgrading my ax11000 to Merlin 386.7_2 . I have a number of 2.4ghz devices (chrome cast, mirror) . With the official bios I was running with smart connect off and my 2.4 band ssid with just a -24 after (so different ssid for 2.4 and 5ghz) . I could cast from my...

Exactly what I had to do and working perfect now on RTM version.

I can not get my AX11000 to flash to official now from the beta. I get invalid firmware error. tried re-downloading it, did a full reset on the router. Not sure what to do.

I have had good luck and stability with the latest firmware. I am running an AX11000 as the main router and 2 XT8's as nodes. For me I had to do a full factory reset on each device to make it stable (just doing an upgrade caused me issues) I rarely see above 400 real world off one of the nodes...

When you installed the firmware did you do a factory reset (the button on the back you insert a toothpick or something in) ? I found without doing this step my router was unstable (would get slow web interface, sometimes not accessible at all, random reboots) My AX11000 has been up almost 5...

When I look at your log your backhaul is at 20mhz. Have you tried forcing it higher? go to the admin panel->Wireless. Select the appropriate band to modify (I tend to force mine all to the highest)

What is so stupid is on the Canadian ad's it has 160mhz advertised.

When you look in the wifi log what is it showing for the backhaul connection? (channel, width, tx/rx rates, db) ? I had to force my backhaul to use 80mhz (160mhz not available in canada even though it is allowed).

Have you tried connecting to each and in the admin section doing a factory reset (check the initialize all the settings) . It's a pain resetting all 3 but may help

I had a few issues after upgrading my XT8. After just upgrading the firmware the web interface would no longer work. I then did a WPS reset on both routers. I could then configure the router again but my wireless node would never be visible or join. I then used the factory reset button on both...