Recent content by Sharbe

I gave that a try, setting TV to highest and NAS to lowest, but it did not help. Then I entered the Source IP and set port 80,443 to highest and that helped me for Amazon Instant Video/Lovefilm. Then I checked it with Putpat TV, which is using the same ports (showing under System Log - Active...

If I set value for protocol to "any" the destination port value will be deleted and you are not able to enter any value. I guess "any" will cover all ports! But I will give it a try and change to TCP/UDP and set the port range. Unfortunately I was not able to find any information about the...

Hi, I fail to find the right QoS Settings on my ASUS RT-AC66U. I have a NAS for some NZB/Usenet downloads set to lowest priority and my Samsung TV Mac address to highest priority to enable undisturbed streaming via the samsung apps e.g. amazon Lovefilm, Pupat TV or any other streamings...

Hello, my DSL connection has a capacity of 4000 kbit/s down and 500 kbit/s up. I tested it with different speed tests for LAN, 5 GHz and 2.4 GHz WLAN channels. For some days now the 2.4 GHz channel speed drops to 450 - 750 kbit/s down and 380 - 450 kbit/s up. I reseted the router to...

OMG :rolleyes: That was quite an easy solution! Thanks and Kudos to Martineau.

@Martineau: JFFS is ACTIVE as per the example screenshot. I will add statements to the files later. Please find my current files attached. @GoNz0: Never used WinSCP before. Maybe I will have some time at the weekend to give it a try. @lancer73: Could you please give me the whole command...

Here we go: RT-N66U login: admin Password: ASUSWRT-Merlin RT-N66U_3.0.0.4 Fri Jan 31 05:20:15 UTC 2014 admin@RT-N66U:/tmp/home/root# mount rootfs on / type rootfs (rw) /dev/root on / type squashfs (ro) proc on /proc type proc (rw) tmpfs on /tmp type tmpfs (rw) devfs on /dev type...

I restarted my router again just to check it: See my telnet log, please: RT-N66U login: admin Password: ASUSWRT-Merlin RT-N66U_3.0.0.4 Fri Jan 31 05:20:15 UTC 2014 admin@RT-N66U:/tmp/home/root# cru l admin@RT-N66U:/tmp/home/root# /jffs/scripts/services-start...

I followed the guide Scheduled LED control as stated on git. I had created services-start, ledson.sh, ledsoff.sh. Then saved them in /jffs/scripts/ and afterwards chmod all scripts to a+rx. Then, I have had reboot my router. To confirm that the jobs are properly set up I had run the...

Hello guys, I need some help, please. ASUS RT-N66U with latest Merlin's build. I placed the "Scheduled LED control" scripts in /jfss/scripts/ , and afterwards chmod it to a+rx. I also added nat-start and wan-start to get direct access to my modems webGUI. When I run the scripts...

Thanks for your help. The hint in Martineaus script helped: # If it doesn't work, then sometimes a modem will only serve its web interface to devices on the same subnet. # You could try to change the modem's subnet mask to 255.255.254.0 (or 255.255.0.0), maybe that helps. Now I am able...

Hi, I am still having problems to get access to my speedtouch modem behind the RT-N66U. I tried to step through the guide by RMerlin in this thread but on the IP I expect to get the modem webinterface i just get the webinterface of the ASUS Router. I am sorry to duplicate the posting also...

Hi, first of all I would like to thank you for this guide. I have tried to step through it and as far as I can see it should work for my equipment, but at least it does not :( I am using the RT-N66U with latest Merlin Firmware 3.0.0.4.374.39_0 and Speedtouch v536i as modem. The router has...