Recent content by spinach

I have followed the wiki instructions for accessing my modem web UI on my AC66U's WAN port here: https://github.com/RMerl/asuswrt-merlin/wiki/Access-modem-Web-UI-on-WAN-port-%28no-script%29 My modem's web UI was very slow to load up this way but it did appear eventually. Unfortunately, now I...

Bah, I figured out I had the QoS settings on my router configured for my old ISP service. Turned that off and I've got full speeds again.

Sorry to resurrect this thread but I'm running into the same issue as Barista. I'm also on TekSavvy VDSL, paying for 25/10. I have a SmartRG 505N modem with the latest firmware. When I connect directly to it, I get 25/10 through Speedtest. When I put it into bridge mode, then connect through my...

You may be right with respect to the amount of torrents. I killed Transmission on my router and will just run it on my server for now. Thanks for your help!

Transmission is enabled but it's pretty much idle. It is serving about 80 torrents but none of them are particularly active as of this posting.

I used 'top' to check my processes and found transmission to be the culprit. I have that running on entware. TM is using 99% of my router's CPU.

I've got an RT-AC66U that I just updated to Merlin's 376.47. After updating, thanks to the new UI, I noticed that my router's CPU is sitting at 100%. It's not doing anything unusual that I know of. How should I begin troubleshooting this?

Thanks for the quick response. This worked perfectly!

I'm running Merlin 3.0.0.4.374.38_2 and want to upgrade to the latest version. I have Entware installed, primarily to run Transmission, and remember seeing something about backing JFFS up before upgrading. I've got a bunch of torrents that I would like to not lose in the upgrade process if at...

Reformatted my HDD and reconfigured JFFS, Entware and Transmission. I must have missed something because it works perfectly.

Yes, I used Lubuntu to format my drive, GParted to be exact. I'll need to check whether Entware is still there, though I suspect it may not be. I have some time to play with this tonight so will try to redo the steps in the Wiki to see if I maybe missed something.

I have the same problem as sathees_t stopping Transmission. I installed it through Entware according to the instructions in the Wiki. I'm have an AC66U running Merlin's 3.0.0.4.374.38_2. USB HDD was freshly formatted to ext3 before installing Transmission. After router reboot, Transmission is...