Recent content by stalq

Yes makes sense, I did try another power brick to see if it boots but that is when it was in CFE mode, then I just used the old one for the rest of the time, alright then this is the first thing I will do after flashing the CFE, thanks

hahah you are right, I need to stop jumping around Interesting, I never thought about heating or freezing, (took notes). Currently, the situation of the device is, it is not booting at all because ofcourse I erased the CFE partition, first I need to put that back in then I will be able back to...

Strange that 99% of the internet is filled with CFE commands like NVRAM reset and flash commands, while our unit does not recognize any of them, I have attached a command help guide for our CFE if it helps, or if anyone can pitch in on how to access/clear the NVRAM using these commands. I...

That was the same situation my router was in before I erased the CFE partition! Turning on, the Lan light would come on for 1 sec then the power led would turn on, after 3 secs the 2.4Ghz would light constantly with no pings or activity to the router! Have you tried to go in CFE mode by...

Yup the first thing I tried was using a different adaptor, I did mention that my power adaptor is fine, tested via multimeter

Is it possible to flash the cfe via JTAG from another device, I do have the mac addresses of this device

Ahh damn, i really wanted to have a learning experience tinkering it but seems like there is no info related to this device on the internet, Where I live this modem costs $400+ on sales and is very rare, we only have shirtty routers in the country lol, if I import i have to pay a 150% duty. My...

You mean some component steered off it's contact? The reason I say its software because I flashed dozens of times and it never used to fully reset, somehow nvram reset never worked for me, so it kept retaining info after every flash until it got corrupted! The serial log showed some of the band...

So my router died all of a sudden, well actually it would fail (Only Power & 2.5Ghz Led would be on) then sometimes if left unplugged it would turn on fully functioning until its restarts then die again! This has been happening for a month now. So I decided to check what was happening via a...

Hey, sorry for bumping an old post but my router Ax92u is having the exact same problem, it will just show the Power Led and 2.5Gz Led constantly with the power led blinking from time to time. When I leave it off for a day or 2 it turns back on, and works until it gets restarted. I did make...

Merlin is now on AX92U, https://github.com/gnuton/asuswrt-merlin.ng/issues/236 I suspected Merlin would have been the issue but my brother confirms this happened a month ago, and he simply unplugged the router for a day and it started working the next day whereas I installed Merlin 3 days ago...

That is the first thing I tried, no dice! also note I had to try this a couple of times as even after the hard reset in the brief moment my router would connect via LAN to my laptop it showed my SSID under the connection name, meaning it didn't hard reset, now I am not sure if it did now as I...

Hey, So my Ax92u won't turn on after a manual restart! It had no prior issues and was on the latest firmware for 3 days after I did a dirty flash of Merlin Beta 2 and then back to the official firmware. When I turn it on the LAN LED turns on for a sec then the power LED stays on for 2-3 secs...

Changed to 80Mhz and it was far more stable than 160, although my speeds are violently jumping from 76mbps to 800mbps no idea if its expected behavior, I am sitting 10ft away from the router with clear line of sight! I think Ax92u does not support 80+80 as I can't see this option! or do you...

I asked my ISP and they confirmed I am not behind a CGNAT, although they did mention they are doing some filtering so if there are some ports I am having issues with even after setting NAT then I need to tell them those ports. I can connect to services using my ISP modem just fine, I get NAT...