Recent content by stefauresi

Hi, Excuse me for disturbing you but I can not find the answer to this question. My router is the RT-AC68U on Firmware:380.62.1 Merlin What is the power of wifi when on minimum ? (in professional setting = power saving ) I need =<25mw Thx

Hi, Anyone can help me ? DATA : data now coming in vlan 832. The frames encapsulate packets ARP, DHCP, ICMP are tagged with a Class of Service (CoS) 6 and "normal" packets to 0 VoIP: the voip happens in the VLAN 832 also. The frames encapsulating SIP and RTP arrive with CoS 5. TV : tv is on...

Some help I can not use my RT-AC68U

Hi, it's possible to make this : interface "vlan832" { send dhcp-class-identifier "sagem"; send user-class "+FSVDSL_livebox.Internet.softathome.Livebox3"; send option-90 00:00:00:00:00:00:00:00:00:00:00:66:74:69:XX:XX:XX:XX:XX:XX:XX:XX; } XX = my login HEX on RT-AC68U...

flash firmware with the last merlin firmware nat loopback works great !!!

Joyeux Noel !! , Merry Christmas !!

hi, Provider ORANGE fiber 1Gbs Wan DHCP (option 90 ) Vlan 832 priority 6 (ICMPv6, ARP, DHCP, DHCPv6) Traffic priority 0 Orange change PPPoE to DHCP (ipv4 - ipv6) excuse me for my bad english , i'm french

Hi , It's possible with RT-AC68U ? WAN DHCP (option 90) priority 6 and traffic priority 0 THX

Hi, I used this http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html the serial port is easily found on the motherboard RT-AC68U I used Putty for reading the boot CFE TIAO manual http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual

I am silly :( , DMZ and port forwarding on the same IP is a stupidity I deleted the redirect. :rolleyes: The loopback works correctly :eek:

I erased port forwarding. I was surprised to see that the loopback works ......

Have you erased nvram or factory default restore via webui? Webui Have you configure it manually from scratch after or you have imported an old config file? manually from scratch Please describe exactly what your steps after flashing it. Fash =>PPOE config => Wifi config => port forwarding...

port forwarding ko :

hi, no scripts After : I expect that the problem back to post the results :rolleyes:

Hi, I erased the nvram after flash but I have the same problem. I lose port forwarding after some time. I have to click apply for it working again :( I have this in my log : After click on apply : ifconfig :