Recent content by tarzan2000

  1. T

    Why no new Merlin firmware?

    Great news!!!!! When will Asus finally fix the error in the form of spam traffic in the log with an active Guest network 1? ;)
  2. T

    STA-to-STA OFDMA issue?

    AX (2R2T_80) <--------> AX (2R2T_160) = 50-70% drop speed with OFDMA / 802.11ax + MU-MIMO active AX (2R2T_80) <--------> AX (2R2T_160) = 50% drop speed with OFDMA / 802.11ax DL \ UL active AX (2R2T_80) <--------> AX (2R2T_160) = no difference in baud rate with active OFDMA / 802.11ax DL AX...
  3. T

    STA-to-STA OFDMA issue?

    AX86U In my case, I can only carry out tests on 1 client AX (80Mhz) and one client AC 160 MHz (Intel 9560). So far I saw a drop in speed on the AX client and turning off the option over. I'll run some more tests more closely.
  4. T

    STA-to-STA OFDMA issue?

    The note. Disabling OFDMA / 802.11ax MU-MIMO - gives me a drop in the test speed on the AX client (iphone 11 pro) from 600 Mbps to 200 Mbps.
  5. T

    Beta Asuswrt-Merlin 386.1 Beta (stage 2) is now available

    386.1_beta4 I checked on two AC86Us with 386.1_beta4 installed and on both cpu wait was disabled. On both I issued pwr config - -wait on and on both the temperature dropped by 8-10 degrees. Now 82 - without additional cooling and 64 - with 120mm fan at 400 rpm w\o cooling 120mm Fan Power...
  6. T

    Beta Asuswrt-Merlin 386.1 Beta (stage 2) is now available

    This is the first time I hear that I have to include something in SSh instead of a simple firmware update !!!!!!!!!! ASUSWRT-Merlin RT-AC86U 386.1_beta4 Fri Jan 8 22:42:18 UTC 2021 [email protected]:/tmp/home/root# pwr show Power Management Configuration Functional Block Status CPU...
  7. T

    Beta Asuswrt-Merlin 386.1 Beta (stage 2) is now available

    Good day! AC86U 386_1_beta4 Two problems, I immediately saw: 1. The temperature, 90 degrees on this firmware version, was about 81-82 (Solved) on 386_1_beta4 on 384.19 2. When my AC86 acts as an OVPN client, the Internet through the tunnel works fine, but I lose access to my AC86U. When...
  8. T

    Beta Asuswrt-Merlin 386.1 Beta is now available

    Yes I understand. But on version 384.19 - this was not in the logs. Never. PS: And how to report to Asus? :(
  9. T

    Beta Asuswrt-Merlin 386.1 Beta is now available

    AC86 A few questions about the new version. 1. Tell me why the log contains a mention of devices that have a DHCP reservation and why does the router want to update them as a device mesh? 2. In the Network Map section on the right there is a scrolling bar for information - somehow it looks...
  10. T

    Beta Asuswrt-Merlin 386.1 Beta is now available

    Dirty update AC86U (384.19) and AC66_B1 (384.19) in MESH configuration was successful on 386.1_beta1.
  11. T

    [Thread-1] [ 386.1_Alpha Build(s) ] Testing available build(s)

    It's clear. The question is, can I fill the old backup from 384.19 into the router after the reset and upgrade to 2.0?
  12. T

    [384.18_Alpha Builds] Testing all variants

    For AC66_b1, which version of alpha can I use? I have ac86u (ai mesh router) + ac66b1 (ai mesh node) PS: Version RT-AC86U_384.18_alpha1-gb66d5282dd works fine in the pair Aimesh ac66u_b1 (384_17)
  13. T

    Aimesh on RT-AC56U

    In the end, I defeated the problem of connecting 56 to the Aimesh system to 86. My mistake was that I connected the main cable from 86 to port 2-3-4 of 56. But it was necessary in Lan1 - since it actually became a WAN port.
  14. T

    Aimesh on RT-AC56U

    Great news, if you manage to fix the operation of indicators and the correct port naming, it will be super. !!!!
  15. T

    Aimesh on RT-AC56U

    Hello everyone! I tried to make ac68u from ac56u - successfully. But, the USB outputs did not work, the power indicator worked and the LAN1 port became like WAN, LAN2-LAN4 as local. At the same time: The full RT-AC68U interface, any official firmware from AC68 including the latest ones from...
Top