Recent content by thecatman

Resolved! the right route is 192.168.10.0 - 255.255.255.0 - 192.168.1.0 LAN

After several searches in the forums I discovered that the timhub does not have the bridge mode, but it is not needed anyway, the timhub (like any TIM router) has the pppoe-passthrough active by default and can be left as it is without touching any settings. On the cascaded router a new PPPoE...

no, mine works normally as a pure modem with its public IP and manages the telephone part, the second router connects to the modem via ppoe and acquires another public IP. however everything works except that from the asus I can't see the modem while with the old router everything worked. edit...

ping 192.168.10.2 Esecuzione di Ping 192.168.10.2 con 32 byte di dati: Risposta da 192.168.10.2: byte=32 durata<1ms TTL=64 Risposta da 192.168.10.2: byte=32 durata<1ms TTL=64 Risposta da 192.168.10.2: byte=32 durata<1ms TTL=64 Risposta da 192.168.10.2: byte=32 durata=1ms TTL=64 ping...

Hello everyone! Sorry if the question has been asked many times but I can't figure it out. I have this router asus gt-ax11000 with latest merlin firmware 3004.388.8.2 (replacing the gt-ax6000 burned by the storm) and timhub ( provider TIM router) configured as a pure modem. They are connected in...

before I had a rt-ac68u, kept for 5 years without any kind of problem. not even with the server. since I got ax-6000 the network problems started. I would like to replace it with something equally valid.

not seen and not accessible

I forgot to ask why, in the network map of the ásus I see machines with fixed ip assigned as dhcp, machines with network cable assigned as wifi and machines not recognized correctly with chinese names of the smart bulb chips even if they are not. connected in wifi I also have 20 aigostar bulbs.

GT-AX6000 firmware: 3004.388.7 hello everyone! i have a problem with the ip assignment to the hp gen8 microserver. the server mounts ubuntu server v20.04.6, always on 24/7, working as a multimedia archive, dvbt2 streaming with tvheadend, centralized kodi database, music streaming server...

I have GT-AX6000 + RT-AX58u v2

I think there are still some problems with the client list. for example, I just assigned a fixed IP to a PC, changing it from the one assigned by DHCP but it doesn't change in the client list. to see the change I have to restart the router.

How did you set up the aimesh node to restart?

I have only cisco unmanaged sg110-24 linked with optical fiber

Ok. thanks. And now I recovered an ax3000 ... surprise! Imesh doesn't work with ax3000 either. Then I must assume I have some configuration problem with gt-ax6000. Any help, thanks! Works! I had to enable wps!

HI. sorry for the stupid question but does ETH backhaul have to be a direct cable connection between the main node and the secondary node or can there also be a switch between the two? Basically my main router is connected to a 48 port switch located in the attic, from there the LAN cables start...