Menu
What's new
By:
Filters Better Search

Recent content by Tume

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. T

    Voxel Custom firmware build for R9000/R8900 v. 1.0.4.59HF

    Upgraded my R9000 and R7800. Thank you Voxel!
  2. T

    Voxel Custom firmware build for R7800 v. 1.0.2.90SF

    Thank you for your continuous work to keep both my routers up to date! I appreciate, as always!
  3. T

    Voxel Custom firmware build for R9000/R8900 v. 1.0.4.56HF

    Thank you for your continuous work to keep both my routers up to date! I appreciate, as always!
  4. T

    Voxel Custom firmware build for R9000/R8900 v. 1.0.4.55HF

    Thank you so much! Updated and as always, everything works very well! I appreciate your work a lot!
  5. T

    Voxel Custom firmware build for R9000/R8900 v. 1.0.4.54HF

    Thank you Voxel! As always works like a charm!
  6. T

    Kamoj Kamoj Add-on Beta testing II

    @primitivo I thought that you shouldd try to set this into your config: PersistentKeepalive = 25
  7. T

    Kamoj Kamoj Add-on Beta testing II

    "Just a thought, would the R9000 since it has a newer linux kernel I'm assuming, will provide faster wireguard speeds??" Yes. I have 400/100 connection. R9000 OpenVPN R9000 Wireguard Both using Mullvad
  8. T

    Voxel Custom firmware build for R9000/R8900 v. 1.0.4.50HF

    Exactly same here. Thank you Voxel!
  9. T

    How to make restricted isolated WLAN/LAN to IOT devices R9000/R7800

    The problem was that After those settings all things behind port 6 is unreachable and without internet also. I have RJ45 now at port 6, which will lead to R7800 WAN port.
  10. T

    How to make restricted isolated WLAN/LAN to IOT devices R9000/R7800

    I ended ordering new switch to tackle this problem, since Netgear routers have lack of VLAN properties. NETGEAR GS108E Switch I will update this thread after I get that device in my house.
  11. T

    How to make restricted isolated WLAN/LAN to IOT devices R9000/R7800

    Voxel newest at both devices + kamoj newest beta. E: I checked, with AP Mode, I can't find "VLAN / Bridge Settings" at R7800. R9000 at Router mode I can use it, but I have to confess that I don't know which port I should check from there if any?
  12. T

    How to make restricted isolated WLAN/LAN to IOT devices R9000/R7800

    How can I do that with R9000 at router mode and R7800 at AP mode?
  13. T

    How to make restricted isolated WLAN/LAN to IOT devices R9000/R7800

    400/100. I get full speed with Wireguard too. My network type is Ethernet, so the network will come from the wall with RJ45 to my R9000 and to R9000 -> R7800 via RJ45 at LAN (R9000) <-> WAN (R7800). Do I need to add Archer C7 some position to make it behind double NAT?
  14. T

    How to make restricted isolated WLAN/LAN to IOT devices R9000/R7800

    My R9000 is WG Client, since it get connection from Mullvad. I have also now useless Archer C7, so which kind of system I need to create, that I can isolate all IoT things behind those and maybe provide VPN also (From R9000)?
  15. T

    How to make restricted isolated WLAN/LAN to IOT devices R9000/R7800

    Hello! I think that one picture tell you more than thousand words, so take a look: So, the easy solution should be just create Guest WLAN and Deny them to see each other. But the problem is that R7800 doesn't let me change that settings. It's greyed out. Why this is forced to be checked...
See more
Top