Menu
What's new
By:
Filters Better Search

Recent content by Welty

  • SNBForums Code of Conduct

    SNBForums is a community for everyone, no matter what their level of experience.

    Please be tolerant and patient of others, especially newcomers. We are all here to share and learn!

    The rules are simple: Be patient, be nice, be helpful or be gone!

  1. W

    Do I understand correctly?

    From ISP to "modem/router", ethernet cable, to a port on "modem/router", the other end, plugs into 2nd 'router' Let's call "modem/router" #1 & second "Router" #2, #1's ethernet cable goes to #2's port #1 ISP supplied modem router, uses IP 192.168.2.1 #2 Netgear ac, uses IP 192.168.1.1...
  2. W

    Do I understand correctly?

    OMG! How can i be more clear, or understand? Thank You
  3. W

    Do I understand correctly?

    Modem/Router >ethernet port to Netgear switch > switch (ethernet-d) to router #2. because: Modem/Router uses IP 192.168.2.1 and second router 'plugged' into NOT wan, & has IP 192.168.1.1 Assume Those wifi signals could never see each other.
  4. W

    Primary to Secondary Router

    Also From my Ipad I went to ipad settings, successfully switched to Netgear5g network, & able to surf the net. I then opened the Nighthawk app. Which says, " Issues connecting with "NETGEAR68-5G" switch wifi networks or troubleshoot below. Go to settings > wifi and join your routers...
  5. W

    Primary to Secondary Router

    Okay! this is it: From RAX80 Manual: Why not use: "Get dynamically from existing router"????????? Basically I'm using this router as a "switch" gives 4 ethernet ports. ISP router basement, wifi weakens, upstairs & further away from router. Wifi would get a boost from the RAX80...
  6. W

    Primary to Secondary Router

    RAC-80-100NAS Confused via netgears step 8. After the factory reset Netgear, to get to log in page, requires ISP ethernet to Netgear, seems like step 8's been done.
  7. W

    Primary to Secondary Router

    If in Netgears step 6 Static IP address, not doing this causes what?
  8. W

    Primary to Secondary Router

    for some reason cannot enter additional text to post #10 The above article goes on if your router does not have "AP Mode" the forcing to AP, involves DHCP off & assigning router #2 diff IP address Also confusing is...
  9. W

    Primary to Secondary Router

    from: https://helpcenter.engeniustech.com/hc/en-us/articles/360054534231-What-is-AP-Mode-
  10. W

    Primary to Secondary Router

    Thanks Tucu!
  11. W

    Primary to Secondary Router

    Thank You! I tried all these Fail Clarification: "unplug it from the network,reset it" that means "factory reset" with all ethernet cables removed, Then plug ethernet cables into #2 & laptop, retry router login for Netgear
  12. W

    Primary to Secondary Router

    Tucu I'm a little unclear : I understand power off router #2 reboot router #1 un plug ethernet cable #2 reset #2 power plug pull plug in laptop to #2 I do not understand configure as access point how
  13. W

    Primary to Secondary Router

    Howdy! I believe & may be mistaken, that I should have "disabled" DHCS on 2nd router & assigned a diff "IP" address to 2nd router. I DID NOT MAKE THOSE CHANGES The 2nd router NetGear is broadcasting SSID & devices can connect, using Netgears SSID's I cannot as currently wired, log into...
  14. W

    Primary to Secondary Router

    Basement now wired for 'ethernet' & upstairs ethernet cable to Netgear router. All ethernet lines working & I can see Netgear's SSID. Primary: Router/Modem Bell Secondary: Router NetGear. 1. Do any changes need be made to secondary router, regarding ethernet? 2. To use wifi...
  15. W

    Cable & 2nd router

    Then 2.5gb replaces killer ec2400, then have 2.5gb switch, 2.5gb card sends to 2.5 switch! I believe killer is special removal process, use there uninstaller. The way i read you post, is killer + 2.5 card sends to 2.5 switch. That would require 2 pcie slots?
See more
Top