Recent content by yanky79

I assume you mean the following code: rm /jffs/addons/spdmerlin.d/.tableupgraded2_* rm /opt/share/spdmerlin.d/.tableupgraded2_* I just ran those commands and ran the speedtest. I now have a single data point on the graph. I also ran it from the GUI as well and it looks like it too is...

@Jack Yaz Checking in to see if the above output was at all helpful.

Here you go @Jack Yaz : 0|StatID|INTEGER|1||1 1|Timestamp|NUMERIC|1||0...

I see a db file there, but dated from a few days ago: When I look at the /opt/share/spdmerlin.d/csv folder, all the files have a current date - but all 0 byte files:

Console is pretty clean. I don't see a db file - here are the contents of /jffs/addons/spdmerlin.d

Yes, they are completing as expected, with valid results. Here are the last few lines from the SysLog: an 8 22:12:02 spdMerlin: Starting speedtest using Spectrum (Los Angeles, CA, United States) for WAN interface Jan 8 22:12:23 spdMerlin: Speedtest results - Download: 176.75 Mbps (data used...

Ran both commands - and I got uf - <green text> spdMerlin: Downloading latest version (v4.1.1) of spdMerlin u - <yellow text> spdMerlin: No new version - latest is v4.1.1 same result, ran Speedtest both in CLI and GUI, not data to display and the CSVs are all 0 byte files

Hello All - I had been using the older version of spdMerlin that was on the Tools page for a while and as I was updating the firmware for the router, I thought it would be a good time to update spdMerlin as well. After some really interesting errors on SQLite, and some reading I realized that...

Running 378.54_2 (but this has been an ongoing issue for several builds. My router will randomly reboot (sometimes it gets to a hard lock stage too, forcing me to reset using the on/off switch). Once the router recovers, the logs are lost and overwritten - so I was having a heck of a time...

I have had the same experience. It started for me using .53 build and is much worse in the .54_2. After about 2 days I get a hard lockup and the only way I can get a connection back is to hard reset the router. When I go to the router to try and find out what happen, the log has reset to...

I was hoping to use my Verizon Jetpack MiFi 6620L (Novatel is the actual manufacturer) as a back up WAN connection via the USB port. The MiFi has a specific tether mode that can be enabled either permanently or ad hoc at power on. I have attached the device to the USB port and it is recognized...

If you have a laser printer I would advise against plugging it into a UPS, the draw it makes on the power can reduce the life of your UPS significantly. Also, if you have a laptop, don't plug it into a UPS, aside from being unnecessary, the power is being inverted, converted multiple times and...

Similar experience I have been experiencing similar behavior as the OP, when the web server side fails to respond. The router continues to route network and internet traffic, but I am unable to get to the web interface. It is especially bad when I have torrents on the download master page, or...