Recent content by ZenitH-AT

I was able to solve this problem by turning off the router and disconnecting the attached USB drive, then turning the router back on and performing the upgrade. Then I powered off the routter, reattached the USB drive and turned it on again. Addons like skynet that rely on the USB device seem to...

Thanks for the quick answer.

I've been getting the following messages in logs since updating my firmware: Feb 13 03:54:51 rc_service: httpd 253:notify_rc restart_qos;restart_firewall Feb 13 03:55:13 BWDPI: fun bitmap = 83 Feb 13 03:55:13 A.QoS: qos_count=0, qos_check=1 Feb 13 03:55:16 A.QoS: qos rule is less than 22 Feb 13...

The router restarted and there was this following block of messages: May 5 07:05:02 kernel: _ Reboot message ... _______________________________________________________ May 5 07:05:02 kernel: <1>Unable to handle kernel paging request at vir�U� address 400d003b May 5 07:05:02 kernel: <1>pgd =...

Recently upgraded from stock to merlin, was curious if these meant anything bad? May 5 07:05:18 lldpd[339]: minimal kernel version required is 2.6.39, got 2.6.36.4brcmarm May 5 07:05:18 lldpd[339]: lldpd may be unable to detect bonds and bridges correctly May 5 07:05:18 lldpd[339]: consider...

I had a simmilar issue before actually where the router kept restarting, among other small issues. I fixed that with a different adapter. But I think this is probably a really bad quality one, because it had a faulty adapter and these connection drops. No overheating issues though. I do notice...

I disabled QoS and traffic monitoring, AiProtection was already off. It lasted about 3 hours then disconnected again. Still have to try the fork. It could be a hardware issue, though...

Ill check out the fork. The reason why it didn't restart then was because I left it alone, but it wasn't working. If it restarts on its own, after a while only the 5GHz light comes on (but doesn't show up, there is no connection to the router at all). I read about disabling QoS on another...

I am not running any adblocker scripts on the router but I'm sure people using the wifi may be, on their own devices. I may have tried restarting it myself but some I think were on their own.

Sorry for the late reply. Here is the log: https://pastebin.com/amxYAyhf

It is a different issue. The first one seemed to be related to the power supply, as all the lights turned off. This situation is much less frequent and doesn't require me to restart the device to regain connection (and the lights all stay on). keeping a ping -t going confirms that it fails to...

I recently put my RT-AC68U router to factory settings (after having almost bricked the thing) and applied some static addresses, port forwarding, renamed some devices, enabled qos and monitoring, etc (the usual basic stuff). Now, the thing decided to drop for abour 2 minutes (couldn't ping...

Oh my god. I was wondering why every few firmware flashes it decided to show wifi lights and other times it didnt. I just changed the power supply out, and mow it works :) thanks for all the help guys. Will keep you updated if my situation changes. Was literally writing an email to my supplier...

I tired the above steps to the letter, which I'm certain was mostly the same thing I was doing before (although I had a different firmware restoration tool previously). So I tried this over and over with every firmware multiple times. Eventually, the WiFi lights turned on, which they did when...

Two hours later and probably over 50 restarts in the last 48 hours. What throws me off is that I was actually able to get into the web GUI and run the network setup once. Got everyone's hopes up too. Is there something I'm missing or not understanding? I don't see how I am performing the same...