5ghz-2

Hi, Is there any way to make Asus XT9 5Ghz-2 use lower WiFi channels (36-64)? I have an ethernet backhaul so I wanted to used the 4x4 5Ghz band for fronthaul instead of backhaul. Also, I've found that the 5Ghz-2 band gets about 20% to 40% more speed than the 5Ghz-1 at > 15 feet, for both AX...

Hello, I've had a pair of XT8s for the last few months, configured with a wireless (5GHz-2) backhaul. Every few hours/days, the backhaul drops to 2.4GHz, interrupting any clients connected to the secondary node and severely reducing the throughput. I've reached a point where I think I've tried...

Hi, question is as per the subject - does anyone know if it's possible to use 5GHz-2 in Bridge mode? It seems to be limited to 5GHz-1 for the bridge. When I try manual settings for the bridge, and select 5GHz-2, it goes into a mode where the LED flashes blue, which appears to mean it's trying...

Hi. I purchased a used ac-5300. I had set it up it’s dual wan option with fall back selected. It worked fine for 2 days. Then on the 3rd day, I restarted it and it got stuck with power led and both bands leds on. No wifi option ssid was shown, i connected it directly with ethernet but could not...

Hi all Trying to fix a weird problem. My 5G-1 seems to always be at least 10dBm lower (sometimes 15-20 lower) compared to the 5G-2 network. I can't work out what's going on. This is perhaps related to another problem I am trying to fix with Wi-Fi...

I can't get 5GHz-2 stable if I use 80MHz bandwidth. The only setting I get reasonably stable is 40MHz on channel 132. All other settings I have tried with resulted in the radio (for 5GHz-2) being switched off after a few minutes. Has someone else this problem? If I choose Auto settings the...